ON Semiconductor
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
MC100E446FNR2
عرض التفاصيل جداول البيانات

MC100E446FNR2

Product Overview

  • Category: Integrated Circuit
  • Use: Logic Gate
  • Characteristics: High-speed, ECL (Emitter-Coupled Logic) technology
  • Package: 28-pin PLCC (Plastic Leaded Chip Carrier)
  • Essence: This integrated circuit is designed for high-speed logic applications and operates on the ECL technology.
  • Packaging/Quantity: Available in reels of 250 units

Specifications

  • Supply Voltage: -4.2V to -5.7V
  • Operating Temperature: -40°C to +85°C
  • Propagation Delay: 1.3 ns (typical)
  • Output Current: ±50 mA
  • Input Voltage: -1.8V to -3.0V
  • Output Voltage: -1.6V

Detailed Pin Configuration

The MC100E446FNR2 has a total of 28 pins. The pin configuration is as follows:

  1. VEE
  2. Q0
  3. Q1
  4. Q2
  5. Q3
  6. Q4
  7. Q5
  8. Q6
  9. Q7
  10. GND
  11. D0
  12. D1
  13. D2
  14. D3
  15. D4
  16. D5
  17. D6
  18. D7
  19. VCC
  20. Q8
  21. Q9
  22. Q10
  23. Q11
  24. Q12
  25. Q13
  26. Q14
  27. Q15
  28. Q16

Functional Features

  • High-speed operation: The MC100E446FNR2 is capable of operating at very high speeds, making it suitable for applications that require fast logic processing.
  • ECL technology: The integrated circuit utilizes Emitter-Coupled Logic technology, which provides excellent noise immunity and high-speed performance.
  • Multiple outputs: With a total of 17 output pins, the MC100E446FNR2 offers flexibility in connecting to various devices or circuits.

Advantages and Disadvantages

Advantages: - High-speed operation - Excellent noise immunity - Multiple output pins for flexibility

Disadvantages: - Requires negative supply voltage - Limited input voltage range

Working Principles

The MC100E446FNR2 operates based on Emitter-Coupled Logic (ECL) technology. ECL is a differential signaling system that uses current-mode logic to achieve high-speed operation. The circuitry within the IC consists of transistors and resistors that work together to process logic signals.

Detailed Application Field Plans

The MC100E446FNR2 can be used in various applications that require high-speed logic processing. Some potential application fields include:

  1. Telecommunications: The high-speed capabilities of the IC make it suitable for telecommunications systems that require rapid data transmission and processing.
  2. Data networking: The MC100E446FNR2 can be utilized in networking equipment to handle high-speed data routing and switching.
  3. Test and measurement: In test and measurement instruments, this IC can be employed for fast signal analysis and processing.

Detailed and Complete Alternative Models

  1. MC100E446FN: Similar to MC100E446FNR2 but available in a different package (28-pin PLCC)
  2. MC100ELT22DR2G: ECL-compatible logic gate with similar characteristics and pin configuration
  3. MC100EP16VADTR2G: Differential receiver with ECL technology, suitable for high-speed logic applications

Note: This is not an exhaustive list of alternative models. Please refer to the manufacturer's documentation for a complete list of alternatives.

Word count: 408 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق MC100E446FNR2 في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of MC100E446FNR2 in technical solutions:

  1. Q: What is MC100E446FNR2? A: MC100E446FNR2 is a high-speed, low-power ECL (Emitter-Coupled Logic) 9-bit binary counter with synchronous reset.

  2. Q: What is the operating voltage range for MC100E446FNR2? A: The operating voltage range for MC100E446FNR2 is typically between -4.2V and -5.7V.

  3. Q: What is the maximum clock frequency supported by MC100E446FNR2? A: MC100E446FNR2 can support clock frequencies up to 1.6 GHz.

  4. Q: Can MC100E446FNR2 be used in both commercial and industrial applications? A: Yes, MC100E446FNR2 is suitable for both commercial and industrial applications.

  5. Q: Does MC100E446FNR2 have any built-in error detection or correction features? A: No, MC100E446FNR2 does not have any built-in error detection or correction features.

  6. Q: What is the power consumption of MC100E446FNR2? A: The power consumption of MC100E446FNR2 is typically around 400 mW.

  7. Q: Can MC100E446FNR2 operate in a wide temperature range? A: Yes, MC100E446FNR2 can operate in a temperature range of -40°C to +85°C.

  8. Q: What is the package type for MC100E446FNR2? A: MC100E446FNR2 is available in a 28-pin PLCC (Plastic Leaded Chip Carrier) package.

  9. Q: Does MC100E446FNR2 have any special power supply requirements? A: Yes, MC100E446FNR2 requires a dual power supply of -5.2V and -4.5V.

  10. Q: Can MC100E446FNR2 be used in high-speed data communication applications? A: Yes, MC100E446FNR2 is commonly used in high-speed data communication applications such as fiber optic networks and telecommunications systems.

Please note that these answers are general and may vary depending on the specific application and requirements.