ON Semiconductor
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
MC74ACT139DT
عرض التفاصيل جداول البيانات

MC74ACT139DT

Product Overview

Category

MC74ACT139DT belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in digital electronic systems for decoding and demultiplexing applications.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Schmitt trigger inputs for noise immunity
  • Balanced propagation delays

Package

MC74ACT139DT is available in a 16-pin dual in-line package (DIP) or a surface mount package (SMD).

Essence

The essence of MC74ACT139DT lies in its ability to decode and demultiplex signals efficiently, making it an essential component in various digital systems.

Packaging/Quantity

MC74ACT139DT is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Supply Voltage: 2.0V - 6.0V
  • Input Voltage: 0V - VCC
  • Output Voltage: 0V - VCC
  • Operating Temperature Range: -40°C to +85°C
  • Logic Family: ACT

Detailed Pin Configuration

  1. GND (Ground)
  2. A0 (Address Input)
  3. A1 (Address Input)
  4. E (Enable Input)
  5. Y0 (Output)
  6. Y1 (Output)
  7. Y2 (Output)
  8. Y3 (Output)
  9. VCC (Supply Voltage)
  10. B0 (Data Input)
  11. B1 (Data Input)
  12. NC (No Connection)
  13. Y4 (Output)
  14. Y5 (Output)
  15. Y6 (Output)
  16. Y7 (Output)

Functional Features

MC74ACT139DT offers the following functional features:

  • Decodes two binary-coded inputs into four mutually exclusive outputs
  • Demultiplexes one input into eight mutually exclusive outputs
  • Provides high-speed operation with low power consumption
  • Incorporates Schmitt trigger inputs for improved noise immunity
  • Ensures balanced propagation delays for accurate signal processing

Advantages and Disadvantages

Advantages

  • High-speed operation enables efficient signal decoding and demultiplexing
  • Low power consumption contributes to energy-efficient designs
  • Wide operating voltage range allows compatibility with various systems
  • Schmitt trigger inputs enhance noise immunity, ensuring reliable performance
  • Balanced propagation delays enable precise timing in digital systems

Disadvantages

  • Limited number of output options (eight outputs) may not be sufficient for complex applications requiring more outputs
  • Lack of built-in protection features against electrical faults or overvoltage conditions

Working Principles

MC74ACT139DT operates based on the principles of digital logic. It takes binary-coded inputs and decodes them into mutually exclusive outputs. The enable input controls the operation, allowing the user to select between decoding or demultiplexing modes.

Detailed Application Field Plans

MC74ACT139DT finds extensive application in various fields, including:

  1. Digital communication systems
  2. Data multiplexing and demultiplexing units
  3. Address decoding in microprocessors and microcontrollers
  4. Memory address selection in computer systems
  5. Industrial automation and control systems
  6. Consumer electronics devices
  7. Automotive electronics

Detailed and Complete Alternative Models

  1. 74HC139: Similar functionality, but operates at a lower voltage range (2V - 6V)
  2. CD74AC139: Offers similar features with improved noise immunity and higher speed operation
  3. SN74LS139: Compatible alternative with TTL logic family and wider temperature range (-55°C to +125°C)

These alternative models provide similar decoding and demultiplexing capabilities, catering to different voltage requirements and operating conditions.

Word count: 511 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق MC74ACT139DT في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of MC74ACT139DT in technical solutions:

  1. Q: What is MC74ACT139DT? A: MC74ACT139DT is a dual 2-to-4 decoder/demultiplexer integrated circuit (IC) that can be used in various digital logic applications.

  2. Q: What is the purpose of MC74ACT139DT? A: The purpose of MC74ACT139DT is to decode binary inputs and select one of four outputs based on the input combination.

  3. Q: What is the voltage range supported by MC74ACT139DT? A: MC74ACT139DT supports a voltage range of 2.0V to 6.0V, making it compatible with both TTL and CMOS logic levels.

  4. Q: How many inputs does MC74ACT139DT have? A: MC74ACT139DT has two independent 2-input decoders, allowing for a total of four input lines.

  5. Q: Can MC74ACT139DT be cascaded to increase the number of output lines? A: Yes, multiple MC74ACT139DT ICs can be cascaded together to increase the number of output lines.

  6. Q: What is the maximum frequency at which MC74ACT139DT can operate? A: MC74ACT139DT can operate at a maximum frequency of 190 MHz.

  7. Q: Does MC74ACT139DT have any built-in protection features? A: Yes, MC74ACT139DT has built-in diode clamps on all inputs to protect against electrostatic discharge (ESD).

  8. Q: What is the power supply requirement for MC74ACT139DT? A: MC74ACT139DT requires a power supply voltage of 2.0V to 6.0V, with typical operating voltage being 5.0V.

  9. Q: Can MC74ACT139DT be used in both synchronous and asynchronous applications? A: Yes, MC74ACT139DT can be used in both synchronous and asynchronous applications depending on the design requirements.

  10. Q: What are some common applications of MC74ACT139DT? A: Some common applications of MC74ACT139DT include address decoding, data routing, memory selection, and multiplexing/demultiplexing tasks in digital systems.

Please note that these answers are general and may vary based on specific design considerations and requirements.