ON Semiconductor
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
MPSA92_D26Z
عرض التفاصيل جداول البيانات

MPSA92_D26Z

Product Overview

  • Category: Transistor
  • Use: Amplification of weak signals
  • Characteristics: High voltage, low power, small signal NPN transistor
  • Package: TO-92
  • Essence: Small-signal amplification
  • Packaging/Quantity: 100 units per pack

Specifications

  • Voltage - Collector Emitter Breakdown (Max): 300V
  • Current - Collector (Ic) (Max): 500mA
  • Power - Max: 625mW
  • DC Current Gain (hFE) (Min) @ Ic, Vce: 40 @ 150mA, 10V
  • Transition Frequency: 100MHz

Detailed Pin Configuration

  1. Emitter (E)
  2. Base (B)
  3. Collector (C)

Functional Features

  • High voltage capability
  • Low leakage current
  • Fast switching speed

Advantages

  • Suitable for high voltage applications
  • Low noise and distortion
  • Compact and versatile

Disadvantages

  • Limited power handling capacity
  • Sensitive to temperature variations

Working Principles

The MPSA92_D26Z is a small-signal NPN transistor designed for use in amplifying weak signals. It operates by controlling the flow of current between the collector and emitter terminals based on the current applied to the base terminal.

Detailed Application Field Plans

  1. Audio amplification circuits
  2. Signal processing circuits
  3. Oscillator circuits

Detailed and Complete Alternative Models

  1. BC547
  2. 2N3904
  3. 2N2222

Word count: 271

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق MPSA92_D26Z في الحلول التقنية

  1. What is the MPSA92_D26Z transistor used for?

    • The MPSA92_D26Z is a high voltage PNP bipolar junction transistor commonly used in amplification and switching applications.

  2. What are the key specifications of the MPSA92_D26Z transistor?

    • The MPSA92_D26Z has a maximum collector-emitter voltage of 300V, a maximum collector current of 500mA, and a maximum power dissipation of 625mW.

  3. How can I use the MPSA92_D26Z in an amplifier circuit?

    • The MPSA92_D26Z can be used as a pre-amplifier or driver stage in audio amplifiers, providing high voltage gain and low noise performance.

  4. Can the MPSA92_D26Z be used in switching applications?

    • Yes, the MPSA92_D26Z can be used in low-power switching applications due to its moderate current and voltage ratings.

  5. What are the typical operating conditions for the MPSA92_D26Z?

    • The MPSA92_D26Z operates well within a temperature range of -55°C to 150°C and is suitable for various industrial and consumer electronic applications.

  6. Does the MPSA92_D26Z require any specific biasing in circuits?

    • Yes, the MPSA92_D26Z requires proper biasing to ensure it operates within its specified parameters. This typically involves setting the base current and voltage appropriately.

  7. Are there any common alternative transistors to the MPSA92_D26Z?

    • Some common alternatives to the MPSA92_D26Z include the MPSA42 and MPSA92, which have similar characteristics and can be used in its place in many circuits.

  8. Can the MPSA92_D26Z be used in high-frequency applications?

    • While the MPSA92_D26Z is not specifically designed for high-frequency applications, it can still be used in moderate frequency circuits with proper design considerations.

  9. What are the typical applications where the MPSA92_D26Z is commonly used?

    • The MPSA92_D26Z is commonly used in audio amplifiers, voltage regulators, motor control circuits, and other general-purpose amplification and switching applications.

  10. Where can I find detailed application notes and example circuits for the MPSA92_D26Z?

    • Detailed application notes and example circuits for the MPSA92_D26Z can be found in the datasheet provided by the manufacturer, as well as in various electronics engineering resources and textbooks.