NB3N3020DTR2G

Basic Information Overview

Category: Integrated Circuit (IC)
Use: Clock Generator and Multiplier
Characteristics: Low Jitter, High Frequency, Low Power Consumption
Package: 8-pin SOIC (Small Outline Integrated Circuit)
Essence: Clock Generation and Multiplication
Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications and Parameters

Supply Voltage: 1.8V to 3.3V
Output Frequency Range: 10MHz to 200MHz
Input Frequency Range: 5MHz to 100MHz
Operating Temperature Range: -40°C to +85°C
Output Type: Differential

Detailed and Complete Pin Configuration

VDD: Power Supply
GND: Ground
CLK_IN: Input Clock Signal
CLK_OUT: Output Clock Signal
OE: Output Enable
NC: No Connection
SEL0: Select Input Divider Ratio
SEL1: Select Input Divider Ratio

Functional Characteristics

Generates and multiplies clock signals with low jitter.
Supports a wide range of input and output frequencies.
Provides differential output for noise reduction.
Allows output enable/disable control.

Advantages and Disadvantages

Advantages: - Low jitter ensures accurate timing in sensitive applications. - Wide frequency range allows flexibility in various designs. - Low power consumption helps conserve energy.

Disadvantages: - Limited pin configuration options. - Requires external components for specific applications.

Applicable Range of Products

Communication systems
Networking equipment
Consumer electronics
Industrial automation

Working Principles

The NB3N3020DTR2G is a clock generator and multiplier IC that utilizes an internal phase-locked loop (PLL) to generate and multiply clock signals. It takes an input clock signal and uses a programmable divider to generate the desired output frequency. The PLL ensures accurate timing and low jitter.

Detailed Application Field Plans

Communication Systems: Used for clock synchronization in data transmission.
Networking Equipment: Provides stable clock signals for network switches and routers.
Consumer Electronics: Enables precise timing in audio/video equipment.
Industrial Automation: Used in control systems for accurate timing and synchronization.
Automotive Electronics: Provides clock signals for various automotive applications.

Detailed Alternative Models

NB3N502A
NB3N551
NB3N557

5 Common Technical Questions and Answers

Q: What is the maximum output frequency of NB3N3020DTR2G? A: The maximum output frequency is 200MHz.
Q: Can I use a 5V power supply with NB3N3020DTR2G? A: No, the recommended supply voltage range is 1.8V to 3.3V.
Q: Does NB3N3020DTR2G support single-ended output? A: No, it only supports differential output.
Q: What is the operating temperature range of NB3N3020DTR2G? A: It can operate within the temperature range of -40°C to +85°C.
Q: How many selectable input divider ratios does NB3N3020DTR2G have? A: It has two selectable input divider ratios controlled by SEL0 and SEL1 pins.

This encyclopedia entry provides an overview of the NB3N3020DTR2G integrated circuit, including its basic information, specifications, pin configuration, functional characteristics, advantages and disadvantages, applicable range of products, working principles, detailed application field plans, alternative models, and common technical questions and answers.