ON Semiconductor
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
NCP1050P136G
عرض التفاصيل جداول البيانات

NCP1050P136G - English Editing Encyclopedia Entry

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - Low-power standby mode - High efficiency - Wide input voltage range - Overvoltage protection - Thermal shutdown protection

Package: DIP-8 (Dual In-line Package, 8 pins)

Essence: The NCP1050P136G is a power management IC designed for low-power applications. It provides efficient power conversion and protection features.

Packaging/Quantity: The NCP1050P136G is typically sold in reels or tubes containing multiple units.

Specifications

  • Input Voltage Range: 4.5V to 40V
  • Output Voltage: 3.3V
  • Output Current: Up to 100mA
  • Standby Current: Less than 100µA
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The NCP1050P136G has the following pin configuration:

  1. VCC - Power supply input
  2. GND - Ground reference
  3. FB - Feedback pin for output voltage regulation
  4. EN - Enable pin for turning the IC on/off
  5. VIN - Input voltage pin
  6. SW - Switching node for power conversion
  7. COMP - Compensation pin for stability control
  8. SS - Soft-start pin for gradual power-up

Functional Features

  • Low-power standby mode reduces energy consumption during idle periods.
  • High efficiency ensures minimal power loss during power conversion.
  • Wide input voltage range allows compatibility with various power sources.
  • Overvoltage protection safeguards connected devices from excessive voltage levels.
  • Thermal shutdown protection prevents overheating of the IC.

Advantages and Disadvantages

Advantages: - Efficient power conversion - Wide input voltage range - Overvoltage and thermal protection

Disadvantages: - Limited output current capacity (up to 100mA) - Requires external components for complete power management system

Working Principles

The NCP1050P136G operates as a buck converter, converting a higher input voltage to a regulated lower output voltage. It utilizes pulse width modulation (PWM) techniques to control the switching of the internal power MOSFET. This allows efficient power transfer from the input to the output while maintaining voltage regulation.

Detailed Application Field Plans

The NCP1050P136G is commonly used in low-power applications that require efficient power management. Some potential application fields include:

  1. Battery-powered devices: The IC's low-power standby mode and high efficiency make it suitable for portable electronics such as smartphones, tablets, and wearables.
  2. Industrial automation: The wide input voltage range and protection features make it ideal for controlling and powering various industrial equipment.
  3. Automotive electronics: The IC can be used in automotive systems to regulate power supply for sensors, actuators, and other electronic components.

Detailed and Complete Alternative Models

  1. NCP1050P065G: Similar to NCP1050P136G but with a different output voltage (6.5V).
  2. NCP1050P033G: Similar to NCP1050P136G but with a different output voltage (3.3V).

These alternative models offer similar functionality but cater to different output voltage requirements.

Word count: 470 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق NCP1050P136G في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of NCP1050P136G in technical solutions:

  1. Q: What is NCP1050P136G? A: NCP1050P136G is a power management integrated circuit (PMIC) designed for use in various technical solutions.

  2. Q: What are the key features of NCP1050P136G? A: Some key features of NCP1050P136G include high efficiency, low standby power consumption, multiple output channels, and overvoltage/overcurrent protection.

  3. Q: What technical solutions can NCP1050P136G be used in? A: NCP1050P136G can be used in a wide range of applications such as industrial automation, consumer electronics, automotive systems, and smart home devices.

  4. Q: How does NCP1050P136G help in improving power efficiency? A: NCP1050P136G incorporates advanced power management techniques like pulse frequency modulation (PFM) and pulse width modulation (PWM) to optimize power efficiency.

  5. Q: Can NCP1050P136G handle multiple voltage outputs? A: Yes, NCP1050P136G has multiple output channels that can provide different voltage levels simultaneously.

  6. Q: Does NCP1050P136G have built-in protection features? A: Yes, NCP1050P136G offers overvoltage protection, overcurrent protection, and thermal shutdown features to safeguard the system.

  7. Q: What is the standby power consumption of NCP1050P136G? A: NCP1050P136G has a low standby power consumption, typically in the microampere range.

  8. Q: Is NCP1050P136G suitable for battery-powered applications? A: Yes, NCP1050P136G is designed to be efficient and can be used in battery-powered applications to extend battery life.

  9. Q: Can NCP1050P136G operate in a wide temperature range? A: Yes, NCP1050P136G is designed to operate reliably in a wide temperature range, typically from -40°C to 85°C.

  10. Q: Are there any evaluation boards or reference designs available for NCP1050P136G? A: Yes, the manufacturer of NCP1050P136G provides evaluation boards and reference designs to help users quickly prototype and implement their technical solutions.

Please note that these answers are general and may vary depending on the specific application and requirements.