ON Semiconductor
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
NCP1339JDR2G
عرض التفاصيل جداول البيانات

NCP1339JDR2G

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High-performance PWM Controller
  • Package: SOIC-8
  • Essence: Regulates and controls power supply in various applications
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 8V to 20V
  • Output Voltage Range: 0.8V to 15V
  • Switching Frequency: 100kHz to 500kHz
  • Operating Temperature Range: -40°C to +125°C
  • Protection Features: Overvoltage Protection, Overcurrent Protection, Thermal Shutdown

Detailed Pin Configuration

The NCP1339JDR2G has the following pin configuration:

  1. VCC: Power Supply Input
  2. GND: Ground
  3. FB: Feedback Pin for Output Voltage Regulation
  4. COMP: Compensation Pin for Loop Stability
  5. CS: Current Sense Pin for Overcurrent Protection
  6. SS: Soft-Start Pin for Controlled Startup
  7. RT: External Resistor Connected to Set Oscillator Frequency
  8. OUT: Output Pin for Power Supply Connection

Functional Features

  • High-efficiency operation
  • Adjustable output voltage
  • Overvoltage and overcurrent protection
  • Soft-start for controlled startup
  • Stable loop compensation for improved performance

Advantages and Disadvantages

Advantages: - High-performance PWM controller - Wide input and output voltage range - Comprehensive protection features - Compact SOIC-8 package for space-constrained applications

Disadvantages: - Limited maximum switching frequency - Requires external components for complete power supply design

Working Principles

The NCP1339JDR2G is a high-performance PWM controller designed for power management applications. It regulates and controls the power supply by adjusting the duty cycle of the output waveform. By varying the duty cycle, the output voltage can be adjusted within a specified range. The controller also incorporates various protection features to ensure safe operation under different conditions.

Detailed Application Field Plans

The NCP1339JDR2G is suitable for a wide range of power management applications, including but not limited to: - Switching Power Supplies - LED Lighting Systems - Battery Chargers - Industrial Control Systems - Automotive Electronics

Detailed and Complete Alternative Models

  1. NCP1342ADR2G: Similar high-performance PWM controller with additional features.
  2. NCP1351ADR2G: PWM controller with integrated power factor correction (PFC) functionality.
  3. NCP1377BDR2G: PWM controller optimized for offline flyback converters.

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word count: 275 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق NCP1339JDR2G في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of NCP1339JDR2G in technical solutions:

  1. Q: What is NCP1339JDR2G? A: NCP1339JDR2G is a voltage mode PWM controller IC used in power supply applications.

  2. Q: What is the input voltage range for NCP1339JDR2G? A: The input voltage range for NCP1339JDR2G is typically between 8V and 25V.

  3. Q: What is the output voltage range supported by NCP1339JDR2G? A: NCP1339JDR2G supports an adjustable output voltage range from 0.8V to 5V.

  4. Q: What is the maximum switching frequency of NCP1339JDR2G? A: The maximum switching frequency of NCP1339JDR2G is typically around 500kHz.

  5. Q: Can NCP1339JDR2G be used in flyback converter topologies? A: Yes, NCP1339JDR2G can be used in flyback converter topologies.

  6. Q: Does NCP1339JDR2G have built-in protection features? A: Yes, NCP1339JDR2G has built-in protection features such as overvoltage protection, overcurrent protection, and thermal shutdown.

  7. Q: What is the typical efficiency of NCP1339JDR2G? A: The typical efficiency of NCP1339JDR2G depends on the specific application and operating conditions but can reach up to 90%.

  8. Q: Is NCP1339JDR2G suitable for low-power applications? A: Yes, NCP1339JDR2G is suitable for low-power applications as it has a low quiescent current and can operate in light load conditions.

  9. Q: Can NCP1339JDR2G be used in automotive applications? A: Yes, NCP1339JDR2G is designed to meet automotive specifications and can be used in automotive applications.

  10. Q: What are the typical applications of NCP1339JDR2G? A: NCP1339JDR2G is commonly used in power supplies for consumer electronics, industrial equipment, automotive systems, and LED lighting applications.

Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of NCP1339JDR2G.