NLAS4717EPFCT1G

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Analog Switch
• Characteristics: Low voltage, low power consumption, high speed
• Package: SOT-563
• Essence: High-performance analog switch
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Supply Voltage Range: 1.65V to 5.5V
• On-Resistance: 0.6Ω (typical) at 2.7V supply
• Off-Leakage Current: 1nA (typical) at 3.3V supply
• Bandwidth: 400MHz (typical) at 2.7V supply
• Crosstalk Rejection: -80dB (typical) at 2.7V supply
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The NLAS4717EPFCT1G has a total of six pins: 1. Pin 1: VDD - Positive supply voltage 2. Pin 2: IN - Input control signal 3. Pin 3: COM - Common terminal for the switch 4. Pin 4: NO - Normally open terminal 5. Pin 5: NC - Normally closed terminal 6. Pin 6: GND - Ground reference

Functional Features

• Low on-resistance and off-leakage current ensure minimal signal distortion and power consumption.
• High bandwidth allows for fast switching between signals.
• Wide supply voltage range enables compatibility with various systems.
• Excellent crosstalk rejection minimizes interference between channels.

Advantages and Disadvantages

Advantages: - Low voltage operation extends battery life in portable devices. - Small package size saves board space. - High-speed performance suits applications requiring rapid signal switching.

Disadvantages: - Limited number of channels (single-pole single-throw configuration). - Not suitable for high-power applications due to low on-resistance.

Working Principles

The NLAS4717EPFCT1G is an analog switch that operates based on the control signal applied to the IN pin. When the control signal is high, the switch connects the COM terminal to the NO terminal, allowing the passage of the input signal. Conversely, when the control signal is low, the switch connects the COM terminal to the NC terminal, blocking the input signal.

Detailed Application Field Plans

The NLAS4717EPFCT1G finds application in various fields, including: 1. Portable Electronics: Used in smartphones, tablets, and wearable devices for signal routing and switching. 2. Audio Systems: Enables audio signal routing in headphones, speakers, and audio mixers. 3. Test and Measurement Equipment: Facilitates signal switching and multiplexing in oscilloscopes, data loggers, and function generators. 4. Industrial Automation: Utilized in control systems for signal routing and sensor interfacing.

Detailed and Complete Alternative Models

1. NLAS4717EPFCT1G's alternative model: NLAS4717EPFCT1B

   • Similar specifications and pin configuration
   • Different package: SOT-23

2. NLAS4717EPFCT1G's alternative model: NLAS4717EPFCT2G

   • Similar specifications and pin configuration
   • Dual-channel configuration (two independent switches)
   • Package: SOT-563

3. NLAS4717EPFCT1G's alternative model: NLAS4717EPFCT3G

   • Similar specifications and pin configuration
   • Triple-channel configuration (three independent switches)
   • Package: SOT-563

4. NLAS4717EPFCT1G's alternative model: NLAS4717EPFCT4G

   • Similar specifications and pin configuration
   • Quad-channel configuration (four independent switches)
   • Package: SOT-563

5. NLAS4717EPFCT1G's alternative model: NLAS4717EPFCT5G

   • Similar specifications and pin configuration
   • Five-channel configuration (five independent switches)
   • Package: SOT-563

In conclusion, the NLAS4717EPFCT1G is a high-performance analog switch with low voltage operation, high speed, and low power consumption. Its compact package and excellent performance make it suitable for various applications in portable electronics, audio systems, test and measurement equipment, and industrial automation. Alternative models with different channel configurations and packages are available to meet specific requirements.