ON Semiconductor
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
PCA9535EMTTXG
عرض التفاصيل جداول البيانات

PCA9535EMTTXG

Product Overview

Category

PCA9535EMTTXG belongs to the category of integrated circuits (ICs).

Use

It is commonly used for digital I/O expansion in various electronic devices.

Characteristics

  • 16-bit I/O expander with I2C interface
  • Low standby current consumption
  • Wide voltage range: 2.3V to 5.5V
  • Schmitt-trigger action on all inputs
  • Open-drain interrupt output
  • Noise filter on SCL/SDA inputs
  • ESD protection exceeds JESD 22, 2000V HBM

Package

PCA9535EMTTXG is available in a TSSOP-24 package.

Essence

The essence of PCA9535EMTTXG lies in its ability to provide additional digital I/O pins through an I2C interface, enabling efficient expansion of the I/O capabilities of electronic devices.

Packaging/Quantity

PCA9535EMTTXG is typically packaged in reels and comes in quantities of 2500 units per reel.

Specifications

  • Supply Voltage Range: 2.3V to 5.5V
  • Number of I/O Pins: 16
  • Interface Type: I2C
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: TSSOP-24

Detailed Pin Configuration

  1. SDA (Serial Data)
  2. SCL (Serial Clock)
  3. INT (Interrupt Output)
  4. A0 (Address Select Bit 0)
  5. A1 (Address Select Bit 1)
  6. A2 (Address Select Bit 2)
  7. GND (Ground)
  8. P00 (I/O Port 0)
  9. P01 (I/O Port 1)
  10. P02 (I/O Port 2)
  11. P03 (I/O Port 3)
  12. P04 (I/O Port 4)
  13. P05 (I/O Port 5)
  14. P06 (I/O Port 6)
  15. P07 (I/O Port 7)
  16. VCC (Supply Voltage)

Functional Features

  • I2C-bus interface allows easy communication with a microcontroller or other devices.
  • Schmitt-trigger action on all inputs ensures reliable input signal detection.
  • Open-drain interrupt output provides a convenient way to notify the host system of any changes in the input status.
  • Noise filter on SCL/SDA inputs helps to improve signal integrity in noisy environments.
  • ESD protection exceeding JESD 22, 2000V HBM ensures robustness against electrostatic discharge.

Advantages and Disadvantages

Advantages

  • Compact size and low power consumption make it suitable for space-constrained applications.
  • Wide voltage range allows compatibility with various power supply configurations.
  • Easy integration with microcontrollers through the I2C interface simplifies system design.

Disadvantages

  • Limited number of I/O pins may not be sufficient for applications requiring extensive digital I/O capabilities.
  • Lack of built-in pull-up resistors may require external components for proper I2C bus operation.

Working Principles

PCA9535EMTTXG operates by receiving commands and data through the I2C interface from a microcontroller or other devices. It then controls the state of its 16 I/O pins accordingly, allowing for digital input or output operations. The interrupt output can be used to notify the host system of any changes in the input status, enabling efficient event-driven processing.

Detailed Application Field Plans

PCA9535EMTTXG finds applications in various fields, including but not limited to: - Industrial automation - Consumer electronics - Automotive systems - Internet of Things (IoT) devices - Robotics

Detailed and Complete Alternative Models

Some alternative models to PCA9535EMTTXG that offer similar functionality include: - PCA9554APW, 8-bit I/O expander with I2C interface - MCP23017-E/SP, 16-bit I/O expander with I2C interface - MAX7313AUG+, 16-bit I/O expander with SPI interface

These alternative models can be considered based on specific requirements and compatibility with the target system.

Word count: 511 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق PCA9535EMTTXG في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of PCA9535EMTTXG:

  1. Q: What is PCA9535EMTTXG? A: PCA9535EMTTXG is a 16-bit I/O expander with an I2C interface, which allows for easy expansion of GPIO (General Purpose Input/Output) pins in technical solutions.

  2. Q: How does PCA9535EMTTXG connect to a microcontroller? A: PCA9535EMTTXG connects to a microcontroller using the I2C bus, which requires only two wires (SDA and SCL) for communication.

  3. Q: Can PCA9535EMTTXG be used to control both input and output pins? A: Yes, PCA9535EMTTXG can be configured to function as either an input or output expander, providing flexibility in various applications.

  4. Q: What is the maximum voltage that PCA9535EMTTXG can handle? A: PCA9535EMTTXG can handle a maximum voltage of 5.5V, making it suitable for use with most microcontrollers.

  5. Q: How many GPIO pins does PCA9535EMTTXG provide? A: PCA9535EMTTXG provides 16 GPIO pins, which can be individually controlled and configured.

  6. Q: Can PCA9535EMTTXG be cascaded with other I/O expanders? A: Yes, PCA9535EMTTXG supports cascading with other I/O expanders through the I2C bus, allowing for even more GPIO pins if needed.

  7. Q: Does PCA9535EMTTXG have built-in pull-up resistors? A: Yes, PCA9535EMTTXG has built-in programmable pull-up resistors, which can be enabled or disabled for each GPIO pin.

  8. Q: Can PCA9535EMTTXG generate interrupts? A: Yes, PCA9535EMTTXG supports interrupt generation on selected GPIO pins, allowing for efficient event-driven designs.

  9. Q: What is the typical power consumption of PCA9535EMTTXG? A: The typical power consumption of PCA9535EMTTXG is very low, making it suitable for battery-powered applications.

  10. Q: Are there any application examples for PCA9535EMTTXG? A: Yes, PCA9535EMTTXG can be used in various applications such as LED control, keypad scanning, and general-purpose I/O expansion.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.