Power Integrations
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
LNK6765V
عرض التفاصيل جداول البيانات

LNK6765V

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - Low power consumption - High efficiency - Compact size - Wide input voltage range - Over-temperature protection - Over-voltage protection - Short-circuit protection

Package: TO-220

Essence: LNK6765V is a power management IC designed for efficient power conversion in various applications.

Packaging/Quantity: The LNK6765V is available in a TO-220 package and is typically sold in reels of 1000 units.

Specifications

  • Input Voltage Range: 85V to 265V AC
  • Output Voltage: 12V DC
  • Output Current: Up to 1.5A
  • Efficiency: >85%
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The LNK6765V has the following pin configuration:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. FB: Feedback pin for output voltage regulation
  4. EN/UVLO: Enable/Undervoltage Lockout control pin
  5. BP/MODE: Burst Mode® operation control pin
  6. D: Drain pin for primary-side MOSFET
  7. S: Source pin for primary-side MOSFET
  8. NC: No connection

Functional Features

  • Primary-side control eliminates the need for an optocoupler and secondary-side feedback components
  • Auto-restart protection feature ensures continuous operation in fault conditions
  • Frequency jittering reduces EMI filter cost
  • Built-in current limit and hysteretic thermal shutdown provide enhanced safety and protection

Advantages

  • High efficiency leads to reduced power consumption and lower operating costs
  • Compact size allows for space-saving designs
  • Wide input voltage range enables compatibility with various power sources
  • Over-temperature, over-voltage, and short-circuit protection ensure system reliability

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Non-isolated design may require additional safety measures in certain applications

Working Principles

The LNK6765V utilizes primary-side control to regulate the output voltage. It integrates a high-voltage MOSFET, a controller, and various protection features into a single IC. The primary-side control eliminates the need for an optocoupler and secondary-side feedback components, simplifying the circuit design and reducing costs.

Detailed Application Field Plans

The LNK6765V is commonly used in the following applications:

  1. Power supplies for consumer electronics
  2. LED lighting systems
  3. Industrial automation equipment
  4. Home appliances
  5. Battery chargers

Detailed and Complete Alternative Models

  1. LNK6766V: Higher output current capability (up to 2A)
  2. LNK6767V: Isolated version with built-in transformer
  3. LNK6768V: Enhanced thermal management for higher temperature operation

These alternative models offer similar functionality but cater to different requirements based on output current, isolation needs, or operating temperature range.

In conclusion, the LNK6765V is a versatile power management IC that offers high efficiency, compact size, and various protection features. Its primary-side control and integrated design make it suitable for a wide range of applications. However, designers should consider alternative models if higher output current, isolation, or enhanced thermal management is required.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق LNK6765V في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of LNK6765V in technical solutions:

  1. Q: What is LNK6765V? A: LNK6765V is a specific model of integrated circuit (IC) developed by Power Integrations for power supply applications.

  2. Q: What are the key features of LNK6765V? A: LNK6765V offers features like high efficiency, low standby power consumption, built-in protection mechanisms, and wide input voltage range.

  3. Q: What are the typical applications of LNK6765V? A: LNK6765V is commonly used in various technical solutions such as LED lighting, smart home devices, industrial controls, consumer electronics, and power adapters.

  4. Q: How does LNK6765V achieve high efficiency? A: LNK6765V incorporates advanced primary-side control technology, which eliminates the need for an optocoupler and secondary-side feedback components, resulting in improved efficiency.

  5. Q: Does LNK6765V support dimming functionality for LED lighting applications? A: Yes, LNK6765V supports both analog and PWM-based dimming methods, making it suitable for LED lighting solutions that require dimming capabilities.

  6. Q: What protection features does LNK6765V offer? A: LNK6765V provides comprehensive protection features such as overvoltage protection (OVP), overcurrent protection (OCP), thermal shutdown, and auto-restart after fault conditions.

  7. Q: Can LNK6765V operate with a wide range of input voltages? A: Yes, LNK6765V has a wide input voltage range, typically from 85V AC to 265V AC, making it compatible with various global power systems.

  8. Q: Is LNK6765V suitable for low-power applications? A: Yes, LNK6765V is designed to operate efficiently even at low power levels, making it suitable for both high-power and low-power applications.

  9. Q: Are there any reference designs available for LNK6765V? A: Yes, Power Integrations provides reference designs and application notes that help engineers implement LNK6765V in their technical solutions effectively.

  10. Q: Where can I find more information about LNK6765V? A: You can find detailed datasheets, application notes, and technical resources on the official website of Power Integrations or by contacting their customer support team.