BCR10CM-16LH#BB0
Product Overview
Category
The BCR10CM-16LH#BB0 belongs to the category of integrated circuits.
Use
It is used as a voltage regulator in electronic circuits.
Characteristics
- Low dropout voltage
- High output voltage accuracy
- Thermal shutdown protection
- Overcurrent protection
Package
The BCR10CM-16LH#BB0 is available in a small outline package (SOP-8).
Essence
This product provides stable and regulated voltage output for various electronic applications.
Packaging/Quantity
The BCR10CM-16LH#BB0 is typically packaged in reels with a quantity of 2500 units per reel.
Specifications
- Input Voltage Range: 4.5V to 24V
- Output Voltage Range: 1.2V to 20V
- Maximum Output Current: 1A
- Dropout Voltage: 300mV at 1A
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- EN (Enable)
- NC (No Connection)
Functional Features
- Adjustable output voltage
- Low quiescent current
- Fast transient response
- Internal soft-start function
Advantages and Disadvantages
Advantages
- Wide input voltage range
- Small form factor
- Overcurrent and thermal protection
- Low dropout voltage
Disadvantages
- Limited maximum output current
- Not suitable for high-power applications
Working Principles
The BCR10CM-16LH#BB0 utilizes a feedback control loop to maintain a constant output voltage regardless of variations in input voltage and load conditions. It regulates the output by adjusting the pass device to maintain the desired voltage level.
Detailed Application Field Plans
The BCR10CM-16LH#BB0 is commonly used in battery-powered devices, portable electronics, and low-power microcontroller systems. Its ability to operate with a wide input voltage range makes it suitable for various battery chemistries and configurations.
Detailed and Complete Alternative Models
- BCR10CM-12LH#BB0
- BCR10CM-18LH#BB0
- BCR10CM-20LH#BB0
This completes the entry for the BCR10CM-16LH#BB0, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق BCR10CM-16LH#BB0 في الحلول التقنية
What is the BCR10CM-16LH#BB0?
- The BCR10CM-16LH#BB0 is a high-voltage, low-dropout linear regulator designed for use in various technical solutions.
What is the input voltage range of the BCR10CM-16LH#BB0?
- The input voltage range of the BCR10CM-16LH#BB0 is typically between 12V and 450V.
What is the output current capability of the BCR10CM-16LH#BB0?
- The BCR10CM-16LH#BB0 can provide an output current of up to 100mA.
What are the typical applications of the BCR10CM-16LH#BB0?
- Typical applications of the BCR10CM-16LH#BB0 include power supplies, industrial equipment, and automotive systems.
What is the dropout voltage of the BCR10CM-16LH#BB0?
- The dropout voltage of the BCR10CM-16LH#BB0 is typically around 1.5V at full load.
What protection features does the BCR10CM-16LH#BB0 offer?
- The BCR10CM-16LH#BB0 includes overcurrent protection, thermal shutdown, and reverse polarity protection.
What is the operating temperature range of the BCR10CM-16LH#BB0?
- The BCR10CM-16LH#BB0 can operate within a temperature range of -40°C to 125°C.
Does the BCR10CM-16LH#BB0 require external components for operation?
- The BCR10CM-16LH#BB0 requires only a small number of external components for stable operation.
Is the BCR10CM-16LH#BB0 suitable for battery-powered applications?
- Yes, the BCR10CM-16LH#BB0's low quiescent current and low dropout voltage make it suitable for battery-powered applications.
Where can I find detailed technical specifications and application notes for the BCR10CM-16LH#BB0?
- Detailed technical specifications and application notes for the BCR10CM-16LH#BB0 can be found on the manufacturer's website or in the product datasheet.