Rohm Semiconductor
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
BA2903YF-CE2
عرض التفاصيل جداول البيانات

BA2903YF-CE2

Product Overview

Category

BA2903YF-CE2 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used as a voltage comparator in various electronic devices and systems.

Characteristics

  • Low power consumption
  • Wide operating voltage range
  • High-speed response
  • Small package size
  • RoHS compliant

Package

BA2903YF-CE2 is available in a small outline package (SOP) with a specified pin configuration.

Essence

The essence of BA2903YF-CE2 lies in its ability to compare input voltages and provide an output signal based on the comparison result.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply voltage: 2.5V to 36V
  • Input offset voltage: ±1mV (maximum)
  • Input bias current: ±5nA (maximum)
  • Response time: 0.3μs (typical)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

BA2903YF-CE2 consists of eight pins arranged as follows:

  1. IN1-: Non-inverting input terminal 1
  2. IN1+: Inverting input terminal 1
  3. GND: Ground
  4. OUT1: Output terminal 1
  5. VCC: Positive supply voltage
  6. OUT2: Output terminal 2
  7. IN2+: Inverting input terminal 2
  8. IN2-: Non-inverting input terminal 2

Functional Features

  • Dual operational amplifiers
  • Open collector outputs
  • Built-in phase compensation
  • Internal frequency compensation
  • Low input bias current

Advantages and Disadvantages

Advantages

  • Low power consumption makes it suitable for battery-powered devices
  • Wide operating voltage range allows for versatile applications
  • High-speed response enables quick signal processing
  • Small package size saves board space
  • RoHS compliance ensures environmental friendliness

Disadvantages

  • Limited number of operational amplifiers (dual configuration only)
  • May not be suitable for applications requiring high precision

Working Principles

BA2903YF-CE2 operates based on the principle of voltage comparison. It compares the voltages applied to its input terminals and produces an output signal based on the result of this comparison.

Detailed Application Field Plans

BA2903YF-CE2 finds applications in various electronic systems, including but not limited to: - Battery-powered devices - Audio amplifiers - Voltage level detectors - Signal conditioning circuits - Sensor interfaces

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to BA2903YF-CE2 are: - LM393 - LM339 - TL331 - MAX9025

These models offer similar functionality and can be used as substitutes depending on specific requirements.

Note: The content provided above is approximately 350 words. Additional information may be required to meet the desired word count of 1100 words.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق BA2903YF-CE2 في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of BA2903YF-CE2 in technical solutions:

  1. Q: What is BA2903YF-CE2? A: BA2903YF-CE2 is a specific model of operational amplifier (op-amp) integrated circuit commonly used in various electronic applications.

  2. Q: What are the key features of BA2903YF-CE2? A: Some key features of BA2903YF-CE2 include low input offset voltage, low input bias current, wide operating voltage range, and rail-to-rail output swing capability.

  3. Q: In what types of technical solutions can BA2903YF-CE2 be used? A: BA2903YF-CE2 can be used in a wide range of technical solutions, including audio amplifiers, sensor signal conditioning circuits, voltage regulators, and active filters.

  4. Q: What is the maximum supply voltage for BA2903YF-CE2? A: The maximum supply voltage for BA2903YF-CE2 is typically around ±18V.

  5. Q: Can BA2903YF-CE2 operate with a single power supply? A: Yes, BA2903YF-CE2 can operate with a single power supply as long as it is within the specified voltage range.

  6. Q: What is the typical input offset voltage of BA2903YF-CE2? A: The typical input offset voltage of BA2903YF-CE2 is around 1mV.

  7. Q: Does BA2903YF-CE2 require external compensation components? A: No, BA2903YF-CE2 is internally compensated and does not require any external compensation components.

  8. Q: What is the maximum output current of BA2903YF-CE2? A: The maximum output current of BA2903YF-CE2 is typically around 40mA.

  9. Q: Can BA2903YF-CE2 be used in low-power applications? A: Yes, BA2903YF-CE2 has a low quiescent current and can be used in low-power applications.

  10. Q: Is BA2903YF-CE2 available in different package options? A: Yes, BA2903YF-CE2 is available in various package options, including SOP-8 and DIP-8.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for BA2903YF-CE2.