BR24G64FVJ-3AGTE2

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Non-volatile memory
• Characteristics: High-speed, low-power consumption
• Package: SOP-8
• Essence: Serial EEPROM
• Packaging/Quantity: Tape and reel, 2500 pieces per reel

Specifications

• Memory capacity: 64 kilobits (8 kilobytes)
• Interface: I2C (2-wire serial interface)
• Operating voltage: 1.7V to 5.5V
• Operating temperature range: -40°C to +85°C
• Write endurance: 1 million cycles
• Data retention: 100 years

Detailed Pin Configuration

The BR24G64FVJ-3AGTE2 has a SOP-8 package with the following pin configuration:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VSS | Ground | | 2 | SDA | Serial data input/output | | 3 | SCL | Serial clock input | | 4 | WP | Write protect | | 5 | VCC | Power supply voltage | | 6 | NC | No connection | | 7 | NC | No connection | | 8 | NC | No connection |

Functional Features

• High-speed data transfer up to 400 kHz
• Low power consumption in both active and standby modes
• Built-in write protection function
• Page write mode for efficient data programming
• Self-timed programming cycle

Advantages and Disadvantages

Advantages: - High-speed data transfer allows for quick access to stored information. - Low power consumption helps prolong battery life in portable devices. - Write protection function ensures data integrity and security. - Page write mode enables efficient programming of multiple data bytes.

Disadvantages: - Limited memory capacity compared to other non-volatile memory options. - Requires an I2C interface for communication, which may not be compatible with all systems.

Working Principles

The BR24G64FVJ-3AGTE2 is a serial EEPROM that utilizes the I2C interface for communication. It stores data in non-volatile memory cells, allowing information to be retained even when power is disconnected. The device operates by sending commands and data through the SDA (serial data) and SCL (serial clock) pins. The write protect (WP) pin can be used to prevent accidental modification of stored data.

Detailed Application Field Plans

The BR24G64FVJ-3AGTE2 is commonly used in various electronic devices that require non-volatile memory storage. Some potential application fields include: 1. Consumer electronics: Used in smart TVs, set-top boxes, and audio/video equipment for storing configuration settings and user preferences. 2. Automotive: Employed in automotive infotainment systems, instrument clusters, and navigation systems for data storage and firmware updates. 3. Industrial automation: Utilized in industrial control systems, PLCs, and sensors for storing calibration data and program parameters. 4. Medical devices: Integrated into medical equipment such as patient monitors and diagnostic devices for storing patient data and device configurations.

Detailed and Complete Alternative Models

1. BR24G16FVT-3AGTE2: 16 kilobit (2 kilobyte) capacity, SOP-8 package, I2C interface.
2. BR24G32FVT-3AGTE2: 32 kilobit (4 kilobyte) capacity, SOP-8 package, I2C interface.
3. BR24G128FVT-3AGTE2: 128 kilobit (16 kilobyte) capacity, SOP-8 package, I2C interface.
4. BR24G256FVT-3AGTE2: 256 kilobit (32 kilobyte) capacity, SOP-8 package, I2C interface.

(Note: The above alternative models are for illustrative purposes and may not represent an exhaustive list of available options.)

Word count: 400