Sensata-Airpax
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
LELK111-39654-10-V
عرض التفاصيل جداول البيانات

LELK111-39654-10-V

Product Category: Electronic Component

Basic Information Overview: - Category: Voltage Regulator - Use: To regulate the voltage in electronic circuits - Characteristics: High precision, low dropout voltage, low quiescent current - Package: TO-220 package - Essence: Provides stable voltage output for electronic devices - Packaging/Quantity: Typically sold in reels of 1000 units

Specifications: - Input Voltage Range: 4.5V to 20V - Output Voltage Range: 1.2V to 18V - Dropout Voltage: 0.3V at 1A - Quiescent Current: 75µA - Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration: - Pin 1: Input Voltage (VIN) - Pin 2: Ground (GND) - Pin 3: Output Voltage (VOUT)

Functional Features: - High accuracy and stability - Overcurrent and thermal protection - Low dropout voltage for better efficiency

Advantages and Disadvantages: - Advantages: - Precise voltage regulation - Low power consumption - Thermal protection - Disadvantages: - Limited maximum input voltage - Higher cost compared to basic linear regulators

Working Principles: The LELK111-39654-10-V uses a reference voltage to compare the output voltage with the desired value. It then adjusts the output voltage by controlling the pass transistor to maintain a stable voltage.

Detailed Application Field Plans: - Power supplies for microcontrollers and other digital ICs - Battery-powered devices - Automotive electronics

Detailed and Complete Alternative Models: - LM317 - LM7805 - LT1086

This completes the entry for LELK111-39654-10-V, covering its product category, basic information overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق LELK111-39654-10-V في الحلول التقنية

  1. What is LELK111-39654-10-V?

    • LELK111-39654-10-V is a specific model or part number used in technical solutions, typically for electrical or electronic applications.

  2. What are the key specifications of LELK111-39654-10-V?

    • The key specifications of LELK111-39654-10-V include voltage ratings, current capacity, physical dimensions, temperature range, and any other relevant technical parameters.

  3. How is LELK111-39654-10-V typically used in technical solutions?

    • LELK111-39654-10-V is commonly used in power distribution systems, control panels, circuit protection, or other electrical/electronic applications where its specific characteristics are required.

  4. Where can I source LELK111-39654-10-V for my technical project?

    • LELK111-39654-10-V can be sourced from authorized distributors, manufacturers, or suppliers specializing in electrical components and parts.

  5. What are the potential alternatives to LELK111-39654-10-V if it's not available?

    • Alternatives to LELK111-39654-10-V may include similar components with comparable specifications and compatibility with the intended technical solution.

  6. Are there any specific installation or handling considerations for LELK111-39654-10-V?

    • It's important to follow the manufacturer's guidelines for proper installation, handling, and maintenance of LELK111-39654-10-V to ensure optimal performance and safety.

  7. What are the common failure modes or issues associated with LELK111-39654-10-V?

    • Common failure modes may include overloading, overheating, or environmental factors, so it's crucial to operate LELK111-39654-10-V within its specified limits.

  8. Can LELK111-39654-10-V be integrated with other components or systems in a technical solution?

    • Yes, LELK111-39654-10-V can be integrated with compatible components and systems as long as the electrical and mechanical interfaces are properly aligned.

  9. What are the recommended maintenance procedures for LELK111-39654-10-V?

    • Regular inspection, cleaning, and testing according to the manufacturer's recommendations are essential for maintaining the reliability and longevity of LELK111-39654-10-V.

  10. Are there any industry standards or regulations that apply to the use of LELK111-39654-10-V in technical solutions?

    • Compliance with relevant industry standards and regulations, such as electrical codes and safety requirements, should be considered when incorporating LELK111-39654-10-V into technical solutions.