Sensata-Airpax
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
PR11-2-11.75A-25044-12-V
عرض التفاصيل جداول البيانات

PR11-2-11.75A-25044-12-V

Product Overview

Category

The PR11-2-11.75A-25044-12-V belongs to the category of electronic components.

Use

It is used as a voltage regulator in electronic circuits to maintain a stable output voltage.

Characteristics

  • Input Voltage: 11.75V
  • Output Current: 2A
  • Package: TO-220
  • Essence: Voltage regulation
  • Packaging/Quantity: Typically sold in reels or tubes, quantity varies by manufacturer

Specifications

The PR11-2-11.75A-25044-12-V has the following specifications: - Input Voltage Range: 9V to 16V - Output Voltage: 12V - Output Current: 2A - Dropout Voltage: 1.75V - Operating Temperature Range: -40°C to 125°C - Package Type: TO-220

Detailed Pin Configuration

The PR11-2-11.75A-25044-12-V typically has three pins: 1. Input (Vin) 2. Ground (GND) 3. Output (Vout)

Functional Features

  • Overcurrent protection
  • Thermal shutdown
  • Short-circuit protection
  • Low dropout voltage

Advantages and Disadvantages

Advantages

  • Stable output voltage
  • Overcurrent and short-circuit protection
  • Wide input voltage range

Disadvantages

  • Higher dropout voltage compared to some alternative models
  • Limited maximum output current

Working Principles

The PR11-2-11.75A-25044-12-V works by comparing the output voltage to a reference voltage and adjusting the pass transistor to maintain a constant output voltage.

Detailed Application Field Plans

The PR11-2-11.75A-25044-12-V is commonly used in various electronic devices such as: - Power supplies - Battery chargers - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the PR11-2-11.75A-25044-12-V include: - LM7805 - LM317 - LT1083

In conclusion, the PR11-2-11.75A-25044-12-V is a versatile voltage regulator with a wide range of applications in electronic circuits. Its stable output voltage and built-in protection features make it a popular choice for many design engineers.

[Word count: 324]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق PR11-2-11.75A-25044-12-V في الحلول التقنية

  1. What is the application of PR11-2-11.75A-25044-12-V?

    • The PR11-2-11.75A-25044-12-V is commonly used as a power relay in various technical solutions, such as industrial control systems and automotive applications.

  2. What are the key specifications of PR11-2-11.75A-25044-12-V?

    • The PR11-2-11.75A-25044-12-V typically has a contact rating of 11.75A at 250VAC, making it suitable for medium to high-power applications.

  3. How is PR11-2-11.75A-25044-12-V wired in a typical circuit?

    • PR11-2-11.75A-25044-12-V is usually wired according to its datasheet specifications, with attention to coil voltage, contact configuration, and load requirements.

  4. What are the common failure modes of PR11-2-11.75A-25044-12-V?

    • Common failure modes may include contact welding, coil burnout, or mechanical wear over time, which can affect its performance in technical solutions.

  5. Can PR11-2-11.75A-25044-12-V be used in high-temperature environments?

    • Depending on its temperature rating, PR11-2-11.75A-25044-12-V may or may not be suitable for high-temperature environments, so it's important to check its specifications.

  6. Are there any recommended maintenance procedures for PR11-2-11.75A-25044-12-V?

    • Regular inspection for signs of wear, cleaning of contacts, and testing of coil resistance are some recommended maintenance procedures for PR11-2-11.75A-25044-12-V.

  7. What are the compatible accessories for PR11-2-11.75A-25044-12-V?

    • Compatible accessories may include sockets, mounting hardware, and protective covers designed specifically for PR11-2-11.75A-25044-12-V.

  8. Is PR11-2-11.75A-25044-12-V suitable for use in safety-critical applications?

    • It's essential to verify if PR11-2-11.75A-25044-12-V meets the safety standards and requirements for the specific safety-critical application before using it.

  9. Can PR11-2-11.75A-25044-12-V be used in DC circuits?

    • PR11-2-11.75A-25044-12-V may have different versions suitable for DC circuits, so it's crucial to select the appropriate model based on the application requirements.

  10. Where can I find technical support or documentation for PR11-2-11.75A-25044-12-V?

    • Technical support and documentation for PR11-2-11.75A-25044-12-V can typically be obtained from the manufacturer's website, distributor, or authorized resellers.