CY28400OC

Basic Information Overview

Category: Integrated Circuit (IC)
Use: Electronic component used in various electronic devices
Characteristics: High performance, low power consumption, compact size
Package: Small Outline Integrated Circuit (SOIC)
Essence: Microcontroller unit with embedded memory and peripherals
Packaging/Quantity: Typically sold in reels or tubes containing multiple units

Specifications and Parameters

Operating Voltage: 3.3V
Clock Frequency: Up to 100 MHz
Memory Size: 256 KB Flash, 32 KB RAM
Number of I/O Pins: 48
Communication Interfaces: UART, SPI, I2C
Analog-to-Digital Converter (ADC) Resolution: 12-bit
Operating Temperature Range: -40°C to +85°C

Detailed and Complete Pin Configuration

VDD (Power Supply)
GND (Ground)
RESET (Reset Input)
XTAL1 (Crystal Oscillator Input)
XTAL2 (Crystal Oscillator Output)
P0.0-P0.7 (General Purpose I/O Pins)
P1.0-P1.7 (General Purpose I/O Pins)
P2.0-P2.7 (General Purpose I/O Pins)
P3.0-P3.7 (General Purpose I/O Pins)
RSTOUT (Reset Output)
RXD (UART Receive Data)
TXD (UART Transmit Data)
SDA (I2C Serial Data)
SCL (I2C Serial Clock)
MOSI (SPI Master Out Slave In)
MISO (SPI Master In Slave Out)
SCK (SPI Serial Clock)
CS (SPI Chip Select)
ADC0 (Analog-to-Digital Converter Input)
ADC1 (Analog-to-Digital Converter Input)
...

Functional Characteristics

High-performance microcontroller with advanced processing capabilities
Low power consumption for energy-efficient operation
Integrated memory and peripherals for enhanced functionality
Support for various communication interfaces for seamless connectivity
Flexible I/O pins for versatile application possibilities
Reliable reset mechanism for system stability

Advantages and Disadvantages

Advantages: - High performance and processing capabilities - Compact size for space-constrained applications - Low power consumption for energy efficiency - Versatile I/O pins for flexible usage - Integrated memory and peripherals for enhanced functionality

Disadvantages: - Limited number of I/O pins compared to some other models - May require additional external components for certain applications - Higher cost compared to simpler microcontrollers

Applicable Range of Products

Consumer electronics
Industrial automation systems
Internet of Things (IoT) devices
Automotive electronics
Medical devices

Working Principles

The CY28400OC operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its embedded memory, interacts with external devices through its I/O pins and communication interfaces, and performs various tasks based on the program it is running.

Detailed Application Field Plans

Consumer Electronics: Used in smart home devices, wearable technology, and multimedia systems.
Industrial Automation Systems: Applied in control units, motor drives, and monitoring systems.
Internet of Things (IoT) Devices: Utilized in sensor nodes, gateways, and edge computing devices.
Automotive Electronics: Integrated into automotive control modules, infotainment systems, and driver assistance systems.
Medical Devices: Incorporated in medical monitoring equipment, diagnostic devices, and implantable devices.

Detailed Alternative Models

CY28300OC: Similar microcontroller with higher clock frequency and larger memory size.
CY28500OC: Alternative model with additional communication interfaces and expanded I/O capabilities.
CY28600OC: Microcontroller with integrated Ethernet connectivity for networked applications.
CY28700OC: Advanced model with enhanced security features and cryptographic capabilities.
CY28800OC: High-end microcontroller with extended memory and advanced signal processing capabilities.

5 Common Technical Questions and Answers

Q: What is the maximum clock frequency supported by the CY28400OC? A: The CY28400OC can operate at a clock frequency of up to 100 MHz.
Q: How many I/O pins does the CY28400OC have? A: The CY28400OC has a total of 48 I/O pins.
Q: What is the operating voltage range for the CY28400OC? A: The CY28400OC operates at a voltage of 3.3V.
Q: Can the CY28400OC be used in automotive applications? A: Yes, the CY28400OC is suitable for automotive