SMC Diode Solutions
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
MBR2080CTP
عرض التفاصيل جداول البيانات

MBR2080CTP

Introduction

The MBR2080CTP is a diode belonging to the category of Schottky rectifier diodes. This diode is commonly used in power supply and voltage regulation applications due to its unique characteristics.

Basic Information Overview

  • Category: Schottky rectifier diode
  • Use: Power supply and voltage regulation
  • Characteristics: High current capability, low forward voltage drop
  • Package: TO-220AB
  • Essence: Efficient power conversion
  • Packaging/Quantity: Typically packaged individually

Specifications

  • Voltage Rating: 80V
  • Current Rating: 20A
  • Forward Voltage Drop: 0.75V at 10A
  • Reverse Leakage Current: 50µA at 80V

Detailed Pin Configuration

The MBR2080CTP has a standard TO-220AB package with three pins: 1. Anode (A) 2. Cathode (K) 3. Not connected (NC)

Functional Features

  • High current capability for power applications
  • Low forward voltage drop for efficient energy conversion
  • Fast switching speed for rapid response in circuits

Advantages and Disadvantages

Advantages: - High current capability allows for robust power handling - Low forward voltage drop minimizes power loss - Fast switching speed enables quick circuit response

Disadvantages: - Higher cost compared to standard silicon diodes - Sensitive to temperature variations

Working Principles

The MBR2080CTP operates based on the Schottky barrier principle, where the metal-semiconductor junction provides low forward voltage drop and fast switching characteristics. When a forward bias is applied, the diode conducts current with minimal voltage drop, making it suitable for power applications.

Detailed Application Field Plans

The MBR2080CTP is widely used in the following applications: - Switching power supplies - Voltage regulators - Solar panel bypass diodes - Motor drive circuits

Detailed and Complete Alternative Models

  1. MBR2045CTP: 45V, 20A Schottky rectifier diode
  2. MBR3060CTP: 60V, 30A Schottky rectifier diode
  3. MBR40100CTP: 100V, 40A Schottky rectifier diode

These alternative models offer varying voltage and current ratings to suit different application requirements.

In conclusion, the MBR2080CTP is a versatile Schottky rectifier diode with high current capability and low forward voltage drop, making it ideal for power supply and voltage regulation applications.

Word count: 345

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق MBR2080CTP في الحلول التقنية

  1. What is MBR2080CTP?

    • MBR2080CTP is a Schottky barrier rectifier diode designed for use in high-frequency applications.

  2. What are the key features of MBR2080CTP?

    • The key features include low forward voltage drop, high-frequency operation, and high current capability.

  3. What are the typical applications of MBR2080CTP?

    • Typical applications include switch-mode power supplies, freewheeling diodes, and polarity protection diodes.

  4. What is the maximum forward voltage of MBR2080CTP?

    • The maximum forward voltage is typically around 0.65V at a forward current of 10A.

  5. What is the reverse recovery time of MBR2080CTP?

    • The reverse recovery time is typically very fast, around 35ns.

  6. What is the maximum average forward current of MBR2080CTP?

    • The maximum average forward current is 20A.

  7. What is the operating temperature range of MBR2080CTP?

    • The operating temperature range is typically -65°C to +175°C.

  8. Is MBR2080CTP RoHS compliant?

    • Yes, MBR2080CTP is RoHS compliant.

  9. Can MBR2080CTP be used in automotive applications?

    • Yes, MBR2080CTP can be used in automotive applications.

  10. What package type is MBR2080CTP available in?

    • MBR2080CTP is available in a TO-220AB package.