SSI Technologies Inc
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
P51-100-S-T-M12-4.5V-000-000
عرض التفاصيل جداول البيانات

P51-100-S-T-M12-4.5V-000-000

Product Category: Electronic Component

Use: The P51-100-S-T-M12-4.5V-000-000 is a voltage sensor used in electronic circuits to detect and measure the presence of 4.5V.

Characteristics: This sensor has a compact design, high accuracy, and low power consumption. It comes in a small package suitable for integration into various electronic devices. The essence of this product lies in its ability to provide precise voltage detection in a wide range of applications.

Packaging/Quantity: The P51-100-S-T-M12-4.5V-000-000 is typically packaged individually or in reels, with quantities varying based on customer requirements.

Specifications: - Voltage Range: 0-4.5V - Operating Temperature: -40°C to 85°C - Accuracy: ±1% - Output Type: Digital

Detailed Pin Configuration: The P51-100-S-T-M12-4.5V-000-000 features a standard 4-pin configuration, with specific pin functions as follows: 1. VCC (Power supply) 2. GND (Ground) 3. OUT (Digital output) 4. NC (No connection)

Functional Features: - Precise voltage detection - Low power consumption - Compact design for easy integration - Digital output for easy interfacing with microcontrollers

Advantages: - High accuracy - Wide operating temperature range - Small form factor - Easy to use and integrate into circuits

Disadvantages: - Limited to detecting 4.5V voltage levels - May require additional circuitry for specific applications

Working Principles: The P51-100-S-T-M12-4.5V-000-000 operates based on the principle of comparing the input voltage to a reference voltage and providing a digital output based on the comparison result.

Detailed Application Field Plans: This sensor is commonly used in battery-powered devices, portable electronics, and automotive applications where precise monitoring of 4.5V voltage levels is essential. It can also be integrated into IoT devices for voltage monitoring purposes.

Detailed and Complete Alternative Models: - P51-100-S-T-M12-3.3V-000-000: Similar sensor for 3.3V voltage detection - P51-100-S-T-M12-5V-000-000: Similar sensor for 5V voltage detection - P51-100-S-T-M12-10V-000-000: Similar sensor for 10V voltage detection

In conclusion, the P51-100-S-T-M12-4.5V-000-000 is a specialized voltage sensor with high accuracy and a compact design, making it suitable for various electronic applications requiring precise 4.5V voltage detection. Its functional features, advantages, and detailed application field plans demonstrate its versatility and importance in modern electronic systems.

[Word Count: 398]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق P51-100-S-T-M12-4.5V-000-000 في الحلول التقنية

  1. What is the operating voltage of P51-100-S-T-M12-4.5V-000-000?

    • The operating voltage of P51-100-S-T-M12-4.5V-000-000 is 4.5V.

  2. What is the typical application of P51-100-S-T-M12-4.5V-000-000?

    • P51-100-S-T-M12-4.5V-000-000 is commonly used in pressure sensing applications such as industrial automation, HVAC systems, and automotive applications.

  3. What is the output signal of P51-100-S-T-M12-4.5V-000-000?

    • The output signal of P51-100-S-T-M12-4.5V-000-000 is typically a voltage or current signal proportional to the applied pressure.

  4. What is the pressure range that P51-100-S-T-M12-4.5V-000-000 can measure?

    • P51-100-S-T-M12-4.5V-000-000 can measure pressure within a specified range, such as 0-100 psi.

  5. Is P51-100-S-T-M12-4.5V-000-000 suitable for outdoor applications?

    • P51-100-S-T-M12-4.5V-000-000 may be suitable for outdoor applications depending on its environmental ratings and protection against moisture and dust.

  6. Can P51-100-S-T-M12-4.5V-000-000 be used in corrosive environments?

    • P51-100-S-T-M12-4.5V-000-000 may have options for corrosion-resistant materials, but it's important to verify its compatibility with specific corrosive environments.

  7. What is the accuracy of P51-100-S-T-M12-4.5V-000-000?

    • The accuracy of P51-100-S-T-M12-4.5V-000-000 is typically specified as a percentage of full scale, such as ±1% FS.

  8. Does P51-100-S-T-M12-4.5V-000-000 require calibration?

    • P51-100-S-T-M12-4.5V-000-000 may require periodic calibration to maintain its accuracy and performance.

  9. What are the mounting options for P51-100-S-T-M12-4.5V-000-000?

    • P51-100-S-T-M12-4.5V-000-000 may offer various mounting options, such as threaded, flange, or surface mount.

  10. Is P51-100-S-T-M12-4.5V-000-000 compatible with digital interfaces?

    • P51-100-S-T-M12-4.5V-000-000 may have versions with digital interfaces such as I2C or SPI for integration with digital systems.