SSI Technologies Inc
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
P51-200-S-C-D-20MA-000-000
عرض التفاصيل جداول البيانات

P51-200-S-C-D-20MA-000-000

Product Overview

Category

The P51-200-S-C-D-20MA-000-000 belongs to the category of industrial pressure sensors.

Use

It is used for measuring and monitoring pressure in various industrial applications.

Characteristics

  • High accuracy
  • Robust construction
  • Wide operating temperature range
  • Compatibility with different media
  • Long-term stability

Package

The sensor is typically packaged in a protective housing to ensure durability and reliability in harsh industrial environments.

Essence

The essence of the P51-200-S-C-D-20MA-000-000 lies in its ability to provide precise and reliable pressure measurements in industrial settings.

Packaging/Quantity

The sensor is usually packaged individually and is available in varying quantities based on customer requirements.

Specifications

  • Pressure Range: 0-200 psi
  • Output: 4-20 mA
  • Operating Temperature: -40°C to 85°C
  • Media Compatibility: Compatible with most industrial fluids and gases
  • Electrical Connection: 3-wire connection

Detailed Pin Configuration

The detailed pin configuration of the P51-200-S-C-D-20MA-000-000 is as follows: 1. Vcc (Power supply) 2. GND (Ground) 3. Signal output

Functional Features

  • Accurate pressure measurement
  • Linear output signal
  • Long-term stability
  • Overpressure protection
  • Easy integration into industrial systems

Advantages

  • High accuracy and reliability
  • Wide operating temperature range
  • Compatibility with various media
  • Robust construction for durability in industrial environments

Disadvantages

  • May require calibration at regular intervals
  • Initial cost may be higher compared to some alternatives

Working Principles

The P51-200-S-C-D-20MA-000-000 operates on the principle of strain gauge technology, where changes in pressure cause deformation in the sensing element, resulting in a proportional change in electrical resistance. This change is then converted into a 4-20 mA output signal, providing an accurate representation of the applied pressure.

Detailed Application Field Plans

The P51-200-S-C-D-20MA-000-000 is commonly used in the following industrial applications: - Hydraulic systems - Pneumatic systems - Industrial machinery - Process control - HVAC systems

Detailed and Complete Alternative Models

Some alternative models to the P51-200-S-C-D-20MA-000-000 include: - P51-100-S-C-D-20MA-000-000 - P51-300-S-C-D-20MA-000-000 - P51-200-S-C-D-10V-000-000

In conclusion, the P51-200-S-C-D-20MA-000-000 is a highly reliable and accurate industrial pressure sensor that finds widespread use in various industrial applications due to its robust construction, wide operating temperature range, and compatibility with different media.

[Word Count: 443]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق P51-200-S-C-D-20MA-000-000 في الحلول التقنية

  1. What is the P51-200-S-C-D-20MA-000-000 sensor used for?

    • The P51-200-S-C-D-20MA-000-000 sensor is commonly used for measuring pressure in various technical applications.

  2. What is the operating range of the P51-200-S-C-D-20MA-000-000 sensor?

    • The operating range of the P51-200-S-C-D-20MA-000-000 sensor is typically from 0 to 200 psi.

  3. What are the output specifications of the P51-200-S-C-D-20MA-000-000 sensor?

    • The P51-200-S-C-D-20MA-000-000 sensor typically provides a 4-20mA output signal.

  4. Can the P51-200-S-C-D-20MA-000-000 sensor be used in high-temperature environments?

    • Yes, the P51-200-S-C-D-20MA-000-000 sensor is designed to operate in high-temperature environments.

  5. What is the accuracy of the P51-200-S-C-D-20MA-000-000 sensor?

    • The P51-200-S-C-D-20MA-000-000 sensor typically has an accuracy of ±0.25% full scale.

  6. Is the P51-200-S-C-D-20MA-000-000 sensor suitable for use with corrosive media?

    • Yes, the P51-200-S-C-D-20MA-000-000 sensor is often suitable for use with corrosive media due to its robust construction.

  7. What is the response time of the P51-200-S-C-D-20MA-000-000 sensor?

    • The response time of the P51-200-S-C-D-20MA-000-000 sensor is typically very fast, allowing for real-time pressure measurements.

  8. Can the P51-200-S-C-D-20MA-000-000 sensor be integrated with digital control systems?

    • Yes, the P51-200-S-C-D-20MA-000-000 sensor can often be integrated with digital control systems through its 4-20mA output.

  9. What are the environmental ratings of the P51-200-S-C-D-20MA-000-000 sensor?

    • The P51-200-S-C-D-20MA-000-000 sensor typically has environmental ratings that make it suitable for harsh industrial environments.

  10. Are there any special installation considerations for the P51-200-S-C-D-20MA-000-000 sensor?

    • It is important to ensure proper mounting and sealing of the P51-200-S-C-D-20MA-000-000 sensor to prevent leaks and ensure accurate measurements.