P51-3000-A-N-I12-20MA
Introduction
The P51-3000-A-N-I12-20MA is a sensor product widely used in industrial applications for measuring pressure. This entry provides an overview of the product, including its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.
Basic Information Overview
- Category: Pressure Sensor
- Use: Measurement of pressure in industrial applications
- Characteristics: High accuracy, robust design, compatibility with various media
- Package: Typically housed in a stainless steel casing
- Essence: Accurate pressure measurement for industrial processes
- Packaging/Quantity: Usually sold individually or in small quantities
Specifications
The P51-3000-A-N-I12-20MA has the following specifications: - Pressure Range: 0-3000 psi - Output Signal: 4-20 mA - Operating Temperature: -40°C to 85°C - Accuracy: ±0.5% full scale - Electrical Connection: Integral cable or connector
Detailed Pin Configuration
The sensor typically has four pins for electrical connections, including power supply, ground, signal output, and temperature compensation (if applicable).
Functional Features
- Accurate pressure measurement within the specified range
- Compatibility with various industrial fluids and gases
- Robust construction for reliable performance in harsh environments
Advantages and Disadvantages
Advantages: - High accuracy - Robust design - Wide operating temperature range - Compatibility with various media
Disadvantages: - Higher cost compared to some alternative models - May require calibration and maintenance
Working Principles
The P51-3000-A-N-I12-20MA operates on the principle of strain gauge technology, where the deformation of a diaphragm due to pressure changes results in a change in resistance, which is then converted into an electrical signal proportional to the applied pressure.
Detailed Application Field Plans
The sensor is commonly used in industrial applications such as hydraulic systems, pneumatic systems, process control, and machinery monitoring where accurate pressure measurement is critical for operational efficiency and safety.
Detailed and Complete Alternative Models
Some alternative models to the P51-3000-A-N-I12-20MA include the P52 series from the same manufacturer, XYZ-4000-B-O-P14-20MA from a different manufacturer, and ABC-2500-C-N-I10-20MA from another competitor. These models offer similar pressure measurement capabilities with variations in accuracy, operating temperature range, and packaging.
This comprehensive overview provides a detailed understanding of the P51-3000-A-N-I12-20MA, its specifications, features, and applications, making it a valuable resource for professionals in the industrial instrumentation field.
[Word count: 443]
قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق P51-3000-A-N-I12-20MA في الحلول التقنية
What is P51-3000-A-N-I12-20MA?
- P51-3000-A-N-I12-20MA is a pressure transducer designed to measure pressure and convert it into an electrical signal, typically used in industrial and technical applications.
How does P51-3000-A-N-I12-20MA work?
- The transducer uses a sensing element to detect pressure changes and then converts this into a 4-20mA electrical signal, which can be interpreted by control systems or data acquisition devices.
What are the typical applications of P51-3000-A-N-I12-20MA?
- Common applications include hydraulic systems, HVAC equipment, process control, and industrial automation where accurate pressure measurement and control are required.
What is the operating range of P51-3000-A-N-I12-20MA?
- The transducer has a specified pressure range within which it can accurately measure pressure, typically ranging from 0 to 3000 psi.
How accurate is P51-3000-A-N-I12-20MA?
- The accuracy of the transducer is typically specified as a percentage of full scale, such as ±0.5% FS, indicating its precision in measuring pressure within its operating range.
Can P51-3000-A-N-I12-20MA be used in hazardous environments?
- Yes, there are versions of the transducer available with intrinsically safe or explosion-proof ratings for use in hazardous locations.
What type of output signal does P51-3000-A-N-I12-20MA provide?
- The transducer provides a 4-20mA current loop output signal, which is commonly used in industrial control systems due to its noise immunity and long-distance transmission capabilities.
Is P51-3000-A-N-I12-20MA compatible with different types of fluids?
- The compatibility of the transducer with various fluids depends on the materials used in its construction, and it's important to verify compatibility with specific fluid types before installation.
Can P51-3000-A-N-I12-20MA be calibrated or adjusted?
- Some models may offer calibration or adjustment features to ensure accurate pressure measurements, but it's essential to follow the manufacturer's guidelines for proper calibration procedures.
What are the environmental considerations for installing P51-3000-A-N-I12-20MA?
- Factors such as temperature, humidity, and vibration should be considered when installing the transducer to ensure reliable and accurate performance in the intended environment.