قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
M24128-BFCS6TP/A

M24128-BFCS6TP/A

Product Overview

Category

The M24128-BFCS6TP/A belongs to the category of non-volatile memory devices.

Use

This product is primarily used for data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Non-volatile: The M24128-BFCS6TP/A retains stored data even when power is disconnected.
  • High capacity: This device has a storage capacity of 128 kilobits (16 kilobytes).
  • Serial interface: It utilizes a serial peripheral interface (SPI) for communication with the host device.
  • Low power consumption: The M24128-BFCS6TP/A operates at low power levels, making it suitable for battery-powered applications.

Package

The M24128-BFCS6TP/A is available in a small surface-mount package, which facilitates easy integration into compact electronic systems.

Essence

The essence of this product lies in its ability to provide reliable and non-volatile storage for critical data in a wide range of electronic applications.

Packaging/Quantity

The M24128-BFCS6TP/A is typically packaged in reels or tubes, containing a specific quantity of devices per package. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Memory capacity: 128 kilobits (16 kilobytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating voltage: 2.5V to 5.5V
  • Operating temperature range: -40°C to +85°C
  • Data retention: Up to 200 years
  • Write endurance: 1 million write cycles

Detailed Pin Configuration

The M24128-BFCS6TP/A follows a standard pin configuration for SPI-based memory devices:

  1. Chip Select (CS)
  2. Serial Clock (SCK)
  3. Serial Data Input (SI)
  4. Serial Data Output (SO)
  5. Write Protect (WP)
  6. Ground (GND)
  7. Power Supply (VCC)

Functional Features

  • High-speed data transfer: The M24128-BFCS6TP/A supports fast data transfer rates, enabling efficient read and write operations.
  • Hardware write protection: The Write Protect (WP) pin allows users to protect stored data from accidental modification.
  • Sequential and random access: This device supports both sequential and random access modes, providing flexibility in data retrieval.

Advantages and Disadvantages

Advantages

  • Non-volatile storage ensures data integrity even during power loss.
  • Compact package size enables integration into space-constrained designs.
  • Low power consumption extends battery life in portable devices.
  • High-speed data transfer enhances overall system performance.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Relatively higher cost per unit compared to some alternative memory options.

Working Principles

The M24128-BFCS6TP/A utilizes electrically erasable programmable read-only memory (EEPROM) technology. It stores data by trapping electrical charges within its memory cells. These charges can be selectively erased or programmed using an external voltage supply and control signals.

Detailed Application Field Plans

The M24128-BFCS6TP/A finds applications in various fields, including: 1. Automotive electronics: Used for storing vehicle configuration data, firmware updates, and diagnostic information. 2. Industrial automation: Enables storage of critical parameters, calibration data, and program code in industrial control systems. 3. Consumer electronics: Utilized in devices like smart TVs, set-top boxes, and gaming consoles for data storage and firmware updates. 4. Medical devices: Stores patient data, device configurations, and software updates in medical equipment.

Detailed and Complete Alternative Models

  1. M24128-BFCS6TP/B: Similar to the M24128-BFCS6TP/A, but with a different package type.
  2. M24128-BFCS6TP/C: Higher capacity variant with 256 kilobits (32 kilobytes) of storage.
  3. M24128-BFCS6TP/D: Lower power consumption version optimized for battery-powered applications.

These alternative models offer similar functionality and compatibility with the M24128-BFCS6TP/A, providing options to suit specific design requirements.

Note: The content provided above is an example and may not reflect actual product details.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق M24128-BFCS6TP/A في الحلول التقنية

  1. What is the maximum clock frequency for M24128-BFCS6TP/A?
    - The maximum clock frequency for M24128-BFCS6TP/A is 5 MHz.

  2. What is the operating voltage range for M24128-BFCS6TP/A?
    - The operating voltage range for M24128-BFCS6TP/A is 1.7V to 5.5V.

  3. Can M24128-BFCS6TP/A be used in automotive applications?
    - Yes, M24128-BFCS6TP/A is suitable for automotive applications.

  4. What is the typical write time for M24128-BFCS6TP/A?
    - The typical write time for M24128-BFCS6TP/A is 5 ms.

  5. Is M24128-BFCS6TP/A compatible with I2C interface?
    - Yes, M24128-BFCS6TP/A is compatible with I2C interface.

  6. What is the temperature range for M24128-BFCS6TP/A?
    - The temperature range for M24128-BFCS6TP/A is -40°C to 85°C.

  7. Can M24128-BFCS6TP/A be used in industrial control systems?
    - Yes, M24128-BFCS6TP/A is suitable for use in industrial control systems.

  8. What is the typical standby current for M24128-BFCS6TP/A?
    - The typical standby current for M24128-BFCS6TP/A is 5 µA.

  9. Does M24128-BFCS6TP/A support software write protection?
    - Yes, M24128-BFCS6TP/A supports software write protection.

  10. What is the package type for M24128-BFCS6TP/A?
    - M24128-BFCS6TP/A is available in an 8-lead SOIC package.