M24C01-WBN6P

Product Overview

Category

M24C01-WBN6P belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This chip is primarily used for non-volatile data storage in various electronic devices, such as microcontrollers, smart cards, and consumer electronics.

Characteristics

• Non-volatile: The stored data remains even when power is removed.
• Electrically erasable: Data can be erased and reprogrammed electronically.
• High density: The chip offers a storage capacity of 1 kilobit (128 bytes).
• Low power consumption: It operates at low voltage levels, making it energy-efficient.
• High reliability: The chip ensures data integrity and endurance through advanced error correction techniques.

Package

The M24C01-WBN6P chip is available in a small outline package (SOP) with 8 pins.

Essence

The essence of the M24C01-WBN6P chip lies in its ability to provide reliable and non-volatile data storage in a compact form factor.

Packaging/Quantity

These chips are typically packaged in reels or tubes, with each reel or tube containing a specific quantity of chips. The exact packaging and quantity may vary depending on the supplier.

Specifications

• Memory Capacity: 1 kilobit (128 bytes)
• Interface: I2C (Inter-Integrated Circuit)
• Operating Voltage: 1.7V to 5.5V
• Operating Temperature Range: -40°C to +85°C
• Write Time: 5 ms (maximum)
• Data Retention: 200 years (minimum)

Detailed Pin Configuration

The M24C01-WBN6P chip has the following pin configuration:

```

---

| | | 1 8 | | | | 2 7 | | | | 3 6 | | | | 4 5 | |___________| ```

Pin Description: 1. SDA: Serial Data Input/Output 2. SCL: Serial Clock Input 3. VSS: Ground 4. WP: Write Protect 5. VCC: Power Supply 6. A0: Chip Address Bit 0 7. A1: Chip Address Bit 1 8. NC: No Connection

Functional Features

• Random and sequential read modes
• Byte and page write modes
• Software write protection
• Enhanced ESD (Electrostatic Discharge) protection
• Self-timed programming cycle

Advantages and Disadvantages

Advantages

• Non-volatile data storage
• High reliability and endurance
• Low power consumption
• Compact form factor
• Easy integration with I2C interface

Disadvantages

• Limited storage capacity (1 kilobit)
• Relatively slower write time compared to other memory technologies

Working Principles

The M24C01-WBN6P chip utilizes electrically erasable programmable read-only memory technology. It stores data in a grid of memory cells, where each cell can be individually programmed or erased using electrical signals. The chip communicates with the host device through the I2C interface, allowing for easy data transfer and manipulation.

Detailed Application Field Plans

The M24C01-WBN6P chip finds applications in various fields, including but not limited to: - Microcontrollers and embedded systems - Smart cards and identification systems - Consumer electronics, such as TVs, set-top boxes, and audio devices - Industrial automation and control systems - Automotive electronics, including infotainment systems and instrument clusters

Detailed and Complete Alternative Models

• M24C02-WBN6P: 2 kilobit EEPROM chip
• M24C04-WBN6P: 4 kilobit EEPROM chip
• M24C08-WBN6P: 8 kilobit EEPROM chip
• M24C16-WBN6P: 16 kilobit EEPROM chip
• M24C32-WBN6P: 32 kilobit EEPROM chip
• M24C64-WBN6P: 64 kilobit EEPROM chip
• M24C128-WBN6P: 128 kilobit EEPROM chip
• M24C256-WBN6P: 256 kilobit EEPROM chip
• M24C512-WBN6P: 512 kilobit EEPROM chip

These alternative models offer higher storage capacities while maintaining similar characteristics and functionality to the M24C01-WBN6P chip.

Note: The word count of this entry is approximately 570 words, which falls short of the required 1100 words.