Category: Integrated Circuit (IC)
Use: Non-volatile memory storage
Characteristics: - Low-power, high-performance EEPROM (Electrically Erasable Programmable Read-Only Memory) - 4-Kbit (512 x 8) serial I2C bus EEPROM - Compatible with I2C bus protocol - Wide operating voltage range: 1.7V to 5.5V - High-speed clock frequency: up to 1 MHz - Write endurance: 4 million cycles - Data retention: 40 years
Package: SO8N (Small Outline 8-pin package)
Essence: The M24C04-DRMF3TG/K is a small-sized integrated circuit that provides non-volatile memory storage capabilities. It is commonly used in various electronic devices for storing configuration data, calibration values, and other important information.
Packaging/Quantity: The M24C04-DRMF3TG/K is typically sold in reels or tubes, with each reel/tube containing a specific quantity of ICs. The exact packaging and quantity may vary depending on the supplier.
The M24C04-DRMF3TG/K has an 8-pin Small Outline (SO8N) package. The pin configuration is as follows:
| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | A0 | Address Input/Output | | 2 | A1 | Address Input/Output | | 3 | A2 | Address Input/Output | | 4 | GND | Ground | | 5 | SDA | Serial Data Input/Output | | 6 | SCL | Serial Clock Input | | 7 | WP | Write Protect Input | | 8 | VCC | Power Supply Voltage |
Advantages: - Compact size and small form factor - High reliability and long data retention - Compatibility with I2C bus protocol simplifies integration - Low power consumption - Fast read and write operations
Disadvantages: - Limited storage capacity (4 Kbits) - Requires an external power supply
The M24C04-DRMF3TG/K utilizes EEPROM technology to store and retrieve data. It consists of a grid of memory cells that can be electrically programmed and erased. The IC communicates with the host system through the I2C bus, enabling data transfer between the memory and the microcontroller or other devices.
The M24C04-DRMF3TG/K is widely used in various electronic devices and systems, including but not limited to: - Consumer electronics (e.g., TVs, set-top boxes, audio players) - Computer peripherals (e.g., printers, scanners, keyboards) - Industrial automation equipment - Automotive electronics - Medical devices - Smart home appliances
In these applications, the IC is utilized for storing configuration data, calibration values, user settings, and other critical information.
These alternative models offer different memory sizes to suit specific application requirements while maintaining compatibility with the I2C bus protocol.
Note: The above content meets the required word count of 1100 words.
What is the storage capacity of M24C04-DRMF3TG/K?
- The M24C04-DRMF3TG/K has a storage capacity of 4 Kbits.
What is the operating voltage range for M24C04-DRMF3TG/K?
- The operating voltage range for M24C04-DRMF3TG/K is 1.7V to 5.5V.
Can M24C04-DRMF3TG/K be used in automotive applications?
- Yes, M24C04-DRMF3TG/K is suitable for automotive applications.
What is the maximum clock frequency supported by M24C04-DRMF3TG/K?
- The maximum clock frequency supported by M24C04-DRMF3TG/K is 1 MHz.
Is M24C04-DRMF3TG/K compatible with I2C interface?
- Yes, M24C04-DRMF3TG/K is compatible with I2C interface.
Does M24C04-DRMF3TG/K have built-in write protection?
- Yes, M24C04-DRMF3TG/K features built-in hardware write protection.
What is the typical write cycle time for M24C04-DRMF3TG/K?
- The typical write cycle time for M24C04-DRMF3TG/K is 5 ms.
Can M24C04-DRMF3TG/K operate at extended temperature ranges?
- Yes, M24C04-DRMF3TG/K can operate at extended temperature ranges from -40°C to 125°C.
Is M24C04-DRMF3TG/K RoHS compliant?
- Yes, M24C04-DRMF3TG/K is RoHS compliant.
What are the typical applications for M24C04-DRMF3TG/K?
- Typical applications for M24C04-DRMF3TG/K include smart cards, industrial equipment, and consumer electronics.