STMicroelectronics
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
STP200NF04L
عرض التفاصيل جداول البيانات

STP200NF04L

Introduction

The STP200NF04L is a power MOSFET belonging to the category of semiconductor devices. This device is commonly used in electronic circuits for its high power handling capabilities and low on-state resistance. The following entry provides an overview of the STP200NF04L, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor Device
  • Use: Power MOSFET for electronic circuits
  • Characteristics: High power handling, low on-state resistance
  • Package: TO-220
  • Essence: Power switching and amplification
  • Packaging/Quantity: Typically packaged individually

Specifications

  • Voltage Rating: 40V
  • Current Rating: 200A
  • On-State Resistance: 2.5mΩ
  • Gate Threshold Voltage: 2-4V
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The STP200NF04L typically has three pins: 1. Gate (G): Input terminal for controlling the MOSFET's conductivity. 2. Drain (D): Output terminal connected to the load. 3. Source (S): Common terminal connected to the ground.

Functional Features

  • High current-carrying capability
  • Low on-state resistance for efficient power transfer
  • Fast switching speed for rapid circuit response
  • Robust construction for reliable operation

Advantages and Disadvantages

Advantages

  • High power handling capacity
  • Low on-state resistance reduces power loss
  • Fast switching speed enhances circuit performance

Disadvantages

  • Sensitivity to static electricity and voltage spikes
  • Gate drive circuitry complexity

Working Principles

The STP200NF04L operates based on the principle of field-effect transistors. When a suitable voltage is applied to the gate terminal, it creates an electric field that allows current to flow between the drain and source terminals. This enables the MOSFET to act as a switch or amplifier in electronic circuits.

Detailed Application Field Plans

The STP200NF04L finds extensive use in various applications, including: - Switching power supplies - Motor control circuits - Audio amplifiers - LED lighting systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to the STP200NF04L include: - IRF3205 - FDP8870 - AUIRF1405

In conclusion, the STP200NF04L is a versatile power MOSFET with high current-carrying capacity and low on-state resistance, making it suitable for a wide range of electronic applications.

[Word Count: 366]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق STP200NF04L في الحلول التقنية

  1. What is the maximum drain-source voltage rating of STP200NF04L?

    • The maximum drain-source voltage rating of STP200NF04L is 40 volts.

  2. What is the continuous drain current rating of STP200NF04L?

    • The continuous drain current rating of STP200NF04L is 120 amperes.

  3. What is the on-state resistance (RDS(on)) of STP200NF04L?

    • The on-state resistance (RDS(on)) of STP200NF04L is typically 4 milliohms at a VGS of 10 volts.

  4. What is the gate threshold voltage of STP200NF04L?

    • The gate threshold voltage of STP200NF04L is typically 2 to 4 volts.

  5. What is the power dissipation of STP200NF04L?

    • The power dissipation of STP200NF04L is 300 watts.

  6. What are the typical applications for STP200NF04L?

    • STP200NF04L is commonly used in high-current switching applications such as motor control, power supplies, and automotive systems.

  7. What is the operating temperature range of STP200NF04L?

    • The operating temperature range of STP200NF04L is -55°C to 175°C.

  8. Does STP200NF04L require a heatsink for operation?

    • Yes, STP200NF04L typically requires a heatsink for efficient heat dissipation, especially when operating at high currents.

  9. Is STP200NF04L suitable for use in automotive applications?

    • Yes, STP200NF04L is suitable for use in automotive applications due to its high current handling capability and rugged construction.

  10. What are the key advantages of using STP200NF04L in technical solutions?

    • The key advantages of using STP200NF04L include low on-state resistance, high current handling capability, and suitability for high-power applications.