قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
STP95N2LH5

STP95N2LH5

Introduction

The STP95N2LH5 is a power MOSFET belonging to the category of semiconductor devices. This device is commonly used in electronic circuits for its specific characteristics and performance.

Basic Information Overview

  • Category: Power MOSFET
  • Use: Electronic circuits, power management
  • Characteristics: High power handling capacity, low on-resistance, fast switching speed
  • Package: TO-220, TO-220FP
  • Essence: Efficient power management
  • Packaging/Quantity: Typically available in reels or tubes containing multiple units

Specifications

  • Voltage Rating: 100V
  • Current Rating: 95A
  • On-Resistance: 2.5mΩ
  • Package Type: TO-220, TO-220FP
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The STP95N2LH5 typically has three pins: 1. Gate (G): Input pin for controlling the MOSFET 2. Drain (D): Output pin for the high-power connection 3. Source (S): Ground reference for the MOSFET

Functional Features

  • High power handling capacity
  • Low on-resistance for efficient power transfer
  • Fast switching speed for improved performance
  • Enhanced thermal management capabilities

Advantages and Disadvantages

Advantages

  • High power handling capacity
  • Low on-resistance
  • Fast switching speed
  • Enhanced thermal management

Disadvantages

  • Sensitive to static electricity
  • Requires careful handling during installation

Working Principles

The STP95N2LH5 operates based on the principles of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. When a sufficient voltage is applied to the gate, the MOSFET allows a high current to flow through it with minimal resistance.

Detailed Application Field Plans

The STP95N2LH5 finds extensive use in various applications, including: - Switching power supplies - Motor control systems - Inverters - Battery management systems - LED lighting drivers

Detailed and Complete Alternative Models

Some alternative models to the STP95N2LH5 include: - IRF1405 - FDP8878 - AUIRFN8409

In conclusion, the STP95N2LH5 power MOSFET offers high-performance characteristics suitable for a wide range of power management applications, making it a popular choice among electronic circuit designers.

[Word count: 345]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق STP95N2LH5 في الحلول التقنية

  1. What is the maximum drain-source voltage for STP95N2LH5?

    • The maximum drain-source voltage for STP95N2LH5 is 100V.
  2. What is the continuous drain current of STP95N2LH5?

    • The continuous drain current of STP95N2LH5 is 95A.
  3. What is the on-resistance of STP95N2LH5?

    • The on-resistance of STP95N2LH5 is 2.5mΩ.
  4. Can STP95N2LH5 be used in automotive applications?

    • Yes, STP95N2LH5 is suitable for automotive applications.
  5. What is the operating temperature range for STP95N2LH5?

    • The operating temperature range for STP95N2LH5 is -55°C to 175°C.
  6. Is STP95N2LH5 suitable for high-power applications?

    • Yes, STP95N2LH5 is designed for high-power applications.
  7. Does STP95N2LH5 require a heat sink for proper operation?

    • Depending on the application and power dissipation, a heat sink may be required for optimal performance.
  8. What are the typical gate charge characteristics of STP95N2LH5?

    • The typical gate charge characteristics of STP95N2LH5 can be found in the datasheet provided by the manufacturer.
  9. Is STP95N2LH5 RoHS compliant?

    • Yes, STP95N2LH5 is RoHS compliant, meaning it meets the Restriction of Hazardous Substances directive.
  10. Are there any recommended application circuits for using STP95N2LH5 in technical solutions?

    • The manufacturer's datasheet typically includes recommended application circuits and guidelines for using STP95N2LH5 in technical solutions.