STMicroelectronics
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
TSM1012AIDT
عرض التفاصيل جداول البيانات

TSM1012AIDT

Product Overview

Category

TSM1012AIDT belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage monitoring and protection.

Characteristics

  • Voltage monitoring and protection IC
  • Low power consumption
  • High accuracy
  • Wide operating voltage range
  • Small package size

Package

TSM1012AIDT is available in a small outline package (SOP) with 8 pins.

Essence

The essence of TSM1012AIDT lies in its ability to monitor and protect voltage levels in electronic circuits, ensuring safe operation and preventing damage.

Packaging/Quantity

TSM1012AIDT is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply voltage: 2.7V to 18V
  • Operating temperature range: -40°C to +125°C
  • Output voltage threshold options: 2.5V, 3.0V, 3.3V, 5.0V
  • Quiescent current: 10µA (typical)
  • Overvoltage detection accuracy: ±1%
  • Undervoltage detection accuracy: ±1%

Detailed Pin Configuration

TSM1012AIDT features the following pin configuration:

  1. GND (Ground)
  2. VCC (Supply voltage)
  3. VIN (Voltage input)
  4. VOUT (Voltage output)
  5. OV (Overvoltage detection threshold selection)
  6. UV (Undervoltage detection threshold selection)
  7. NC (No connection)
  8. EN (Enable)

Functional Features

  • Overvoltage detection: Monitors the input voltage and triggers an alert when it exceeds the set threshold.
  • Undervoltage detection: Monitors the input voltage and triggers an alert when it falls below the set threshold.
  • Enable/disable control: Allows the user to enable or disable the voltage monitoring and protection functionality.

Advantages and Disadvantages

Advantages

  • High accuracy in voltage monitoring
  • Wide operating voltage range
  • Low power consumption
  • Small package size, suitable for space-constrained applications

Disadvantages

  • Limited output voltage threshold options
  • No built-in hysteresis for voltage detection

Working Principles

TSM1012AIDT operates by comparing the input voltage with the set threshold levels. When the input voltage exceeds the overvoltage threshold or falls below the undervoltage threshold, the corresponding alert is triggered. The enable/disable control allows the user to activate or deactivate the voltage monitoring and protection functionality as needed.

Detailed Application Field Plans

TSM1012AIDT finds applications in various electronic devices and systems where voltage monitoring and protection are critical. Some specific application fields include:

  1. Power supply units: Ensures stable voltage levels and protects against overvoltage/undervoltage conditions.
  2. Battery management systems: Monitors battery voltage to prevent damage due to overcharging or deep discharge.
  3. Industrial automation: Protects sensitive equipment from voltage fluctuations and ensures reliable operation.
  4. Automotive electronics: Safeguards vehicle electrical systems from voltage anomalies, enhancing overall reliability.

Detailed and Complete Alternative Models

  1. TSM1011AIDT: Similar to TSM1012AIDT but with a different pin configuration.
  2. TSM1013AIDT: Offers additional features such as temperature monitoring along with voltage protection.
  3. TSM1014AIDT: Provides multiple independent voltage monitoring channels for enhanced system protection.

These alternative models offer similar functionality to TSM1012AIDT but may have variations in pin configuration, additional features, or specific application focus.

Word count: 536 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق TSM1012AIDT في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of TSM1012AIDT in technical solutions:

  1. Q: What is TSM1012AIDT? A: TSM1012AIDT is a voltage supervisor and reset IC (Integrated Circuit) commonly used in technical solutions.

  2. Q: What is the purpose of TSM1012AIDT? A: The purpose of TSM1012AIDT is to monitor the supply voltage and generate a reset signal when the voltage falls below a certain threshold.

  3. Q: How does TSM1012AIDT work? A: TSM1012AIDT continuously monitors the supply voltage using an internal voltage reference. When the voltage drops below the specified threshold, it triggers a reset signal.

  4. Q: What are the typical applications of TSM1012AIDT? A: TSM1012AIDT is commonly used in microcontroller-based systems, embedded systems, power management circuits, and other applications where a reliable reset function is required.

  5. Q: Can TSM1012AIDT be used with different supply voltages? A: Yes, TSM1012AIDT can be used with a wide range of supply voltages, typically from 1.8V to 5.5V.

  6. Q: Does TSM1012AIDT have any adjustable parameters? A: Yes, TSM1012AIDT has an adjustable reset threshold voltage that can be set using external resistors.

  7. Q: Is TSM1012AIDT capable of generating multiple reset signals? A: No, TSM1012AIDT generates a single reset signal. If multiple reset signals are required, additional TSM1012AIDT ICs can be used.

  8. Q: Can TSM1012AIDT tolerate voltage spikes or noise on the supply line? A: Yes, TSM1012AIDT has built-in hysteresis and noise immunity to prevent false triggering due to voltage spikes or noise.

  9. Q: What is the power consumption of TSM1012AIDT? A: TSM1012AIDT has low power consumption, typically in the microampere range, making it suitable for battery-powered applications.

  10. Q: Are there any specific precautions to consider when using TSM1012AIDT? A: It is important to ensure proper decoupling and filtering of the supply voltage to minimize noise and ensure reliable operation. Additionally, the datasheet should be consulted for detailed application guidelines and recommendations.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.