Taiwan Semiconductor Corporation
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
BZD27C24PHRQG
عرض التفاصيل جداول البيانات

BZD27C24PHRQG Encyclopedia Entry

Product Overview

Category

The BZD27C24PHRQG belongs to the category of semiconductor devices, specifically a type of Zener diode.

Use

It is commonly used for voltage regulation and protection in electronic circuits.

Characteristics

  • Voltage Regulation: Provides stable voltage output.
  • Protection: Safeguards sensitive components from voltage spikes.
  • Package: Available in a small surface-mount package.
  • Essence: Essential for maintaining consistent voltage levels in electronic systems.
  • Packaging/Quantity: Typically packaged in reels or tubes containing multiple units.

Specifications

  • Voltage Rating: 24V
  • Power Dissipation: 500mW
  • Tolerance: ±5%
  • Operating Temperature Range: -65°C to +150°C
  • Package Type: SOD-123

Detailed Pin Configuration

The BZD27C24PHRQG has a standard SOD-123 package with two pins. The pinout configuration is as follows: 1. Anode (A) 2. Cathode (K)

Functional Features

  • Stable Voltage Output: Maintains a constant voltage across varying loads and temperatures.
  • Overvoltage Protection: Clamps excessive voltages to protect downstream components.
  • Fast Response Time: Rapidly responds to changes in input voltage.

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Compact size
  • Wide operating temperature range

Disadvantages

  • Limited power dissipation capability
  • Tolerance of ±5% may not be suitable for precision applications

Working Principles

The BZD27C24PHRQG operates based on the Zener effect, where it maintains a nearly constant voltage across its terminals when reverse-biased.

Detailed Application Field Plans

Voltage Regulation

The BZD27C24PHRQG can be used in various electronic devices such as power supplies, voltage references, and battery management systems to ensure stable voltage output.

Overvoltage Protection

In automotive electronics, the diode can protect sensitive components from voltage surges caused by load dumps or transient events.

Detailed and Complete Alternative Models

  • BZX84C24: Similar 24V Zener diode with SOT-23 package
  • 1N4748A: 24V Zener diode with axial lead package
  • MMBZ27VALT1G: 24V Zener diode in SOD-123 package

In conclusion, the BZD27C24PHRQG Zener diode offers reliable voltage regulation and overvoltage protection in a compact package, making it suitable for a wide range of electronic applications.

[Word count: 398]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق BZD27C24PHRQG في الحلول التقنية

  1. What is BZD27C24PHRQG?

    • BZD27C24PHRQG is a specific model or type of component, such as an integrated circuit, resistor, capacitor, or other electronic part.

  2. What are the key specifications of BZD27C24PHRQG?

    • The key specifications of BZD27C24PHRQG may include its voltage rating, current rating, capacitance (if applicable), temperature range, package type, and other relevant electrical characteristics.

  3. How can BZD27C24PHRQG be used in technical solutions?

    • BZD27C24PHRQG can be used in technical solutions for voltage regulation, transient suppression, signal conditioning, power management, and other electronic applications where its specific characteristics are beneficial.

  4. What are the typical applications of BZD27C24PHRQG?

    • Typical applications of BZD27C24PHRQG may include use in power supplies, voltage regulators, surge protectors, signal conditioning circuits, and other electronic systems requiring voltage clamping or regulation.

  5. What are the advantages of using BZD27C24PHRQG in technical solutions?

    • The advantages of using BZD27C24PHRQG may include its high reliability, precise voltage regulation, low leakage current, fast response time, and compact form factor.

  6. Are there any limitations or considerations when using BZD27C24PHRQG?

    • Some considerations when using BZD27C24PHRQG may include its maximum operating temperature, voltage derating, potential reverse leakage, and compatibility with other components in the circuit.

  7. How does BZD27C24PHRQG compare to similar components in the market?

    • BZD27C24PHRQG may offer specific advantages over similar components, such as lower leakage current, higher surge handling capability, tighter voltage tolerance, or better temperature stability.

  8. Can BZD27C24PHRQG be used in automotive or industrial applications?

    • BZD27C24PHRQG may be suitable for automotive and industrial applications, but it's important to verify its compliance with relevant standards and environmental conditions.

  9. What are the recommended soldering and handling guidelines for BZD27C24PHRQG?

    • Recommended soldering and handling guidelines for BZD27C24PHRQG may include specific temperature profiles, moisture sensitivity level (MSL), and precautions to prevent electrostatic discharge (ESD) damage.

  10. Where can I find detailed datasheets and application notes for BZD27C24PHRQG?

    • Detailed datasheets and application notes for BZD27C24PHRQG can typically be found on the manufacturer's website, distributor's resources, or through direct inquiry to the component supplier.