TDK Corporation
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
NTCG163JH103HTDS
عرض التفاصيل جداول البيانات

NTCG163JH103HTDS

Product Overview

NTCG163JH103HTDS belongs to the category of NTC thermistors. These are widely used for temperature sensing and control applications due to their characteristics such as high sensitivity, small size, and fast response time. The product is typically used in electronic circuits for temperature compensation, temperature measurement, and temperature control. It comes in a standard package with specific electrical and thermal characteristics. The essence of NTCG163JH103HTDS lies in its ability to accurately sense and respond to changes in temperature. It is commonly available in reels or bulk packaging, with varying quantities depending on the manufacturer's specifications.

Specifications

  • Resistance Value: 10kΩ
  • Tolerance: ±5%
  • Operating Temperature Range: -40°C to 125°C
  • Thermal Time Constant: 7s (max)
  • Maximum Power Rating: 50mW
  • Package Type: 0603 (1608 Metric)

Detailed Pin Configuration

The NTCG163JH103HTDS has two terminals, with the resistance value changing with temperature. The pin configuration is as follows: 1. Terminal 1: Connected to one end of the thermistor element. 2. Terminal 2: Connected to the other end of the thermistor element.

Functional Features

  • Temperature Sensing: Accurately measures temperature changes.
  • Temperature Compensation: Used to compensate for temperature variations in electronic circuits.
  • Fast Response Time: Rapidly reacts to temperature fluctuations.
  • Small Size: Occupies minimal space in electronic designs.

Advantages and Disadvantages

Advantages

  • High sensitivity to temperature changes.
  • Compact size allows for integration into small electronic devices.
  • Wide operating temperature range enables versatile applications.

Disadvantages

  • Limited precision compared to other temperature sensing devices.
  • Susceptible to self-heating effects at higher currents.

Working Principles

NTCG163JH103HTDS operates based on the principle of negative temperature coefficient (NTC), where its resistance decreases as the temperature increases. This characteristic makes it suitable for various temperature-dependent applications, including temperature monitoring and control.

Detailed Application Field Plans

The NTCG163JH103HTDS finds extensive use in the following application fields: - Consumer Electronics: Used in smart home devices, mobile phones, and wearables for temperature monitoring. - Automotive: Employed in automotive climate control systems and battery management systems. - Industrial Control: Integrated into industrial equipment for temperature regulation and monitoring.

Detailed and Complete Alternative Models

Some alternative models to NTCG163JH103HTDS include: - NTCG163JF103FTDS - NTCG163JH104HTDS - NTCG163JH105HTDS

These alternatives offer similar temperature sensing capabilities with slight variations in specifications and package sizes.

This comprehensive entry provides an in-depth understanding of NTCG163JH103HTDS, covering its basic information, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Word Count: 443

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق NTCG163JH103HTDS في الحلول التقنية

  1. What is NTCG163JH103HTDS?

    • NTCG163JH103HTDS is a type of NTC thermistor, which is a temperature-sensitive resistor that exhibits a decrease in resistance with an increase in temperature.

  2. What are the typical applications of NTCG163JH103HTDS?

    • NTCG163JH103HTDS is commonly used in temperature sensing and compensation, inrush current limiting, and temperature control in various electronic devices and systems.

  3. What is the resistance-temperature characteristic of NTCG163JH103HTDS?

    • The resistance of NTCG163JH103HTDS decreases as the temperature increases, following a specific curve or equation provided by the manufacturer.

  4. How can NTCG163JH103HTDS be integrated into a temperature sensing system?

    • NTCG163JH103HTDS can be connected to a suitable circuit that measures its resistance and converts it into a corresponding temperature value using calibration data.

  5. What are the operating temperature ranges for NTCG163JH103HTDS?

    • The operating temperature range for NTCG163JH103HTDS typically depends on the specific model and can vary, but it is important to consult the datasheet for accurate information.

  6. How does NTCG163JH103HTDS contribute to inrush current limiting?

    • NTCG163JH103HTDS can be used to limit inrush current by temporarily presenting a higher resistance when power is initially applied, thus reducing stress on components.

  7. Can NTCG163JH103HTDS be used for temperature compensation in electronic circuits?

    • Yes, NTCG163JH103HTDS can be employed to provide temperature compensation in circuits, ensuring stable performance across varying temperatures.

  8. What are the key considerations for designing with NTCG163JH103HTDS?

    • Designers should consider factors such as self-heating effects, accuracy requirements, response time, and environmental conditions when integrating NTCG163JH103HTDS into their technical solutions.

  9. Are there any specific soldering or handling precautions for NTCG163JH103HTDS?

    • It is important to follow the manufacturer's guidelines for soldering and handling to prevent damage to the NTC thermistor and ensure reliable performance.

  10. Where can I find detailed specifications and application notes for NTCG163JH103HTDS?

    • Detailed specifications, application notes, and usage guidelines for NTCG163JH103HTDS can be found in the product datasheet provided by the manufacturer or distributor.