TDK Corporation
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
NTCG164LH683JT1
عرض التفاصيل جداول البيانات

NTCG164LH683JT1

Introduction

The NTCG164LH683JT1 is a thermistor belonging to the category of electronic components. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Component
  • Use: Temperature Sensing and Control
  • Characteristics: Negative Temperature Coefficient, High Precision, Small Size
  • Package: SMD (Surface Mount Device)
  • Essence: Thermistor for temperature measurement and compensation
  • Packaging/Quantity: Reel/Tape, 3000 pieces per reel

Specifications

  • Resistance Value: 68kΩ
  • Tolerance: ±5%
  • Operating Temperature Range: -40°C to 125°C
  • Maximum Power Rating: 100mW
  • Thermal Time Constant: 7 seconds

Detailed Pin Configuration

The NTCG164LH683JT1 has two terminals with a standard SMD layout. The pin configuration is as follows: - Pin 1: Connected to one end of the thermistor - Pin 2: Connected to the other end of the thermistor

Functional Features

  • Temperature Sensing: Provides accurate resistance changes with temperature variations
  • Compact Design: Suitable for space-constrained applications
  • High Precision: Offers precise temperature measurements

Advantages and Disadvantages

Advantages

  • High precision in temperature measurements
  • Compact size for integration into small devices
  • Wide operating temperature range

Disadvantages

  • Limited power handling capacity
  • Tolerance of ±5% may not be suitable for high-precision applications

Working Principles

The NTCG164LH683JT1 operates based on the principle of negative temperature coefficient, where its resistance decreases with increasing temperature. This property allows it to accurately sense and measure temperature changes in various applications.

Detailed Application Field Plans

The NTCG164LH683JT1 is commonly used in the following applications: - Temperature Sensing: Used in thermostats, HVAC systems, and industrial temperature control systems - Battery Management: Monitors and controls battery temperature in portable electronic devices - Automotive Electronics: Utilized in automotive climate control systems and engine temperature monitoring

Detailed and Complete Alternative Models

Some alternative models to the NTCG164LH683JT1 include: - NTCG104EF104FT1 - NTCG104EH104FT1 - NTCG104EJ104FT1 - NTCG104EJ103FT1

In conclusion, the NTCG164LH683JT1 thermistor offers high precision temperature sensing in a compact package, making it suitable for a wide range of temperature measurement and control applications.

(Word count: 398)

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق NTCG164LH683JT1 في الحلول التقنية

  1. What is the NTCG164LH683JT1 used for?

    • The NTCG164LH683JT1 is a thermistor commonly used for temperature sensing and compensation in various technical solutions.

  2. What is the resistance value of NTCG164LH683JT1 at room temperature?

    • The resistance value of NTCG164LH683JT1 at room temperature is 68k ohms.

  3. How does NTCG164LH683JT1 behave with changes in temperature?

    • NTCG164LH683JT1 is a negative temperature coefficient (NTC) thermistor, meaning its resistance decreases as the temperature increases.

  4. What are the typical applications of NTCG164LH683JT1 in technical solutions?

    • NTCG164LH683JT1 is commonly used in temperature measurement and control circuits, battery management systems, and industrial equipment where temperature monitoring is critical.

  5. What is the operating temperature range of NTCG164LH683JT1?

    • The operating temperature range of NTCG164LH683JT1 is typically from -40°C to 125°C.

  6. Can NTCG164LH683JT1 be used for over-temperature protection?

    • Yes, NTCG164LH683JT1 can be utilized for over-temperature protection by integrating it into circuitry that triggers an alarm or shutdown when the temperature exceeds a certain threshold.

  7. Is NTCG164LH683JT1 suitable for automotive applications?

    • Yes, NTCG164LH683JT1 is suitable for automotive applications such as engine temperature monitoring, cabin climate control, and battery thermal management.

  8. What are the key characteristics of NTCG164LH683JT1 for design considerations?

    • Some key characteristics include high sensitivity to temperature changes, stable performance over a wide temperature range, and low power consumption.

  9. Can NTCG164LH683JT1 be used in moisture-prone environments?

    • It's important to avoid exposing NTCG164LH683JT1 to excessive moisture, as it may affect its performance. However, there are encapsulated versions available for use in such environments.

  10. Are there any specific soldering or handling precautions for NTCG164LH683JT1?

    • Care should be taken to avoid subjecting NTCG164LH683JT1 to excessive mechanical stress during soldering, and it's recommended to follow the manufacturer's guidelines for proper handling and mounting.