قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
CD74AC574MG4

CD74AC574MG4

Product Overview

Category

CD74AC574MG4 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for data storage and transfer.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with various logic families

Package

CD74AC574MG4 is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of CD74AC574MG4 lies in its ability to store and transmit digital data efficiently.

Packaging/Quantity

This product is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Supply Voltage: 2V - 6V
  • Operating Temperature Range: -40°C to +85°C
  • Input/Output Type: Tri-state
  • Number of Inputs: 8
  • Number of Outputs: 8
  • Logic Family: AC

Detailed Pin Configuration

  1. GND (Ground)
  2. D0 (Data Input 0)
  3. D1 (Data Input 1)
  4. D2 (Data Input 2)
  5. D3 (Data Input 3)
  6. D4 (Data Input 4)
  7. D5 (Data Input 5)
  8. D6 (Data Input 6)
  9. D7 (Data Input 7)
  10. OE (Output Enable)
  11. CP (Clock Pulse)
  12. Q0 (Output 0)
  13. Q1 (Output 1)
  14. Q2 (Output 2)
  15. Q3 (Output 3)
  16. Q4 (Output 4)
  17. Q5 (Output 5)
  18. Q6 (Output 6)
  19. Q7 (Output 7)
  20. VCC (Supply Voltage)

Functional Features

  • Data storage and transfer
  • Tri-state output for bus-oriented applications
  • Clock-controlled operation
  • High-speed data processing

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient data handling
  • Low power consumption contributes to energy efficiency
  • Wide operating voltage range provides flexibility in various applications
  • Compatibility with different logic families enhances versatility

Disadvantages

  • Limited number of inputs and outputs may restrict certain complex applications
  • Relatively small package size may pose challenges in densely populated circuit boards

Working Principles

CD74AC574MG4 operates based on the principles of digital logic circuits. It utilizes clock pulses to latch and store data from the input pins, which can then be transmitted to the output pins when enabled. The tri-state output feature allows multiple devices to share a common bus without interference.

Detailed Application Field Plans

CD74AC574MG4 finds extensive use in various electronic systems, including but not limited to: - Microcontrollers - Data communication devices - Memory modules - Industrial automation equipment - Automotive electronics

Detailed and Complete Alternative Models

  1. SN74AC574: Similar functionality and specifications, offered by Texas Instruments.
  2. MC74AC574: Equivalent IC provided by ON Semiconductor.
  3. 74HC574: Alternative model from NXP Semiconductors, compatible with CMOS logic family.

Note: This is not an exhaustive list, and there are several other alternative models available in the market.

Word count: 422 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق CD74AC574MG4 في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of CD74AC574MG4 in technical solutions:

  1. Q: What is CD74AC574MG4? A: CD74AC574MG4 is a type of octal D-type flip-flop integrated circuit (IC) that can store and transfer data in digital systems.

  2. Q: What is the purpose of CD74AC574MG4 in technical solutions? A: CD74AC574MG4 is commonly used for data storage, synchronization, and signal buffering in various digital applications.

  3. Q: What is the operating voltage range for CD74AC574MG4? A: CD74AC574MG4 typically operates within a voltage range of 2V to 6V.

  4. Q: How many flip-flops are there in CD74AC574MG4? A: CD74AC574MG4 consists of 8 individual D-type flip-flops, making it an octal flip-flop IC.

  5. Q: What is the maximum clock frequency supported by CD74AC574MG4? A: CD74AC574MG4 can operate at clock frequencies up to 100 MHz, depending on the specific datasheet specifications.

  6. Q: Can CD74AC574MG4 be cascaded to increase the number of flip-flops? A: Yes, multiple CD74AC574MG4 ICs can be cascaded together to increase the number of flip-flops in a system.

  7. Q: Does CD74AC574MG4 have any built-in output enable functionality? A: Yes, CD74AC574MG4 has a dedicated output enable pin (OE) that allows the user to control the output state of the flip-flops.

  8. Q: What is the typical power consumption of CD74AC574MG4? A: The power consumption of CD74AC574MG4 depends on factors such as supply voltage and operating frequency, but it is generally low.

  9. Q: Can CD74AC574MG4 be used in both synchronous and asynchronous applications? A: Yes, CD74AC574MG4 can be used in both synchronous and asynchronous applications, depending on the specific requirements.

  10. Q: What are some common applications of CD74AC574MG4? A: CD74AC574MG4 is commonly used in microcontrollers, digital signal processors, data storage systems, communication devices, and other digital circuits where data synchronization and storage are required.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.