The CD74AC74M96 has a total of 96 pins. The pin configuration is as follows:
(Note: This is just a partial list. The complete pin configuration can be found in the datasheet.)
The CD74AC74M96 is based on positive-edge-triggered D-type flip-flops. It operates by storing and transferring digital data using clock pulses. The inputs (D1, D2) represent the data to be stored, while the clock pulse inputs (CP1, CP2) control the transfer of data into the flip-flops. The clear inputs (CLR) allow for synchronous reset of the flip-flop outputs (Q1, Q2). The complementary outputs (Q̅1, Q̅2) provide inverted versions of the flip-flop outputs.
The CD74AC74M96 can be used in various applications that require flip-flops, such as:
(Note: This is just a partial list. There are several alternative models available from different manufacturers.)
Word count: 431 words
Sure! Here are 10 common questions and answers related to the application of CD74AC74M96 in technical solutions:
Question: What is CD74AC74M96?
Answer: CD74AC74M96 is a dual D-type flip-flop integrated circuit (IC) that can be used in various digital logic applications.
Question: What is the operating voltage range for CD74AC74M96?
Answer: The operating voltage range for CD74AC74M96 is typically between 2V and 6V.
Question: What is the maximum clock frequency supported by CD74AC74M96?
Answer: CD74AC74M96 can support clock frequencies up to 100MHz.
Question: Can CD74AC74M96 be used in both synchronous and asynchronous applications?
Answer: Yes, CD74AC74M96 can be used in both synchronous and asynchronous applications depending on the design requirements.
Question: What is the typical propagation delay of CD74AC74M96?
Answer: The typical propagation delay of CD74AC74M96 is around 7.5ns.
Question: How many flip-flops are there in CD74AC74M96?
Answer: CD74AC74M96 contains two independent D-type flip-flops.
Question: What is the output drive capability of CD74AC74M96?
Answer: CD74AC74M96 has a standard output drive capability of 24mA.
Question: Can CD74AC74M96 be cascaded to create larger counters or registers?
Answer: Yes, CD74AC74M96 can be cascaded with other flip-flops to create larger counters or registers.
Question: Is CD74AC74M96 compatible with other logic families?
Answer: CD74AC74M96 is compatible with a wide range of logic families, including TTL and CMOS.
Question: What are some common applications of CD74AC74M96?
Answer: CD74AC74M96 can be used in applications such as data storage, frequency division, counters, registers, and general-purpose digital logic circuits.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.