The CD74HCT173E has a total of 16 pins. Here is the detailed pin configuration:
Advantages: - High-speed operation enables efficient data processing. - Versatile IC suitable for a wide range of digital logic applications. - Low power consumption due to CMOS technology. - Asynchronous clear and master reset inputs enhance flexibility.
Disadvantages: - Limited number of flip-flops (4 in this case). - Requires external clock signal for proper functioning. - Not suitable for analog signal processing.
The CD74HCT173E is a synchronous sequential circuit that stores and transfers data using flip-flops. The inputs D0-D3 hold the data to be stored, while the CP input controls the transfer of data from the inputs to the outputs. The CLR input asynchronously clears all flip-flops, and the MR input resets them synchronously. The complementary outputs Q0-Q3 provide the stored data and its inverted form.
The CD74HCT173E can be used in various digital systems and applications, including but not limited to: - Data storage and transfer in microcontrollers and microprocessors. - State machine design and implementation. - Register-based operations in arithmetic and logic units (ALUs). - Digital communication systems. - Control and timing circuits.
Here are some alternative models that offer similar functionality to the CD74HCT173E: - SN74HCT173N by Texas Instruments - MC74HCT173AN by ON Semiconductor - 74HCT173 by NXP Semiconductors - CD40173BE by Texas Instruments
These alternatives can be considered based on availability, pricing, and specific requirements of the application.
Word count: 446 words
Sure! Here are 10 common questions and answers related to the application of CD74HCT173E in technical solutions:
Q: What is CD74HCT173E? A: CD74HCT173E is a 4-bit D-type register with asynchronous clear, manufactured by Texas Instruments.
Q: What is the operating voltage range for CD74HCT173E? A: The operating voltage range for CD74HCT173E is typically between 4.5V and 5.5V.
Q: What is the maximum clock frequency supported by CD74HCT173E? A: CD74HCT173E can support clock frequencies up to 25 MHz.
Q: How many flip-flops are there in CD74HCT173E? A: CD74HCT173E consists of four flip-flops, each capable of storing one bit of data.
Q: Can CD74HCT173E be used as a shift register? A: Yes, CD74HCT173E can be cascaded to form a shift register by connecting the output of one register to the input of the next.
Q: What is the purpose of the asynchronous clear input in CD74HCT173E? A: The asynchronous clear input allows you to reset all the flip-flops simultaneously to a known state.
Q: What is the power supply current consumption of CD74HCT173E? A: The power supply current consumption of CD74HCT173E is typically around 8 mA.
Q: Can CD74HCT173E be used in both parallel and serial data transfer applications? A: Yes, CD74HCT173E can be used in both parallel and serial data transfer applications, depending on how it is connected.
Q: What is the output drive capability of CD74HCT173E? A: CD74HCT173E has a high output drive capability, allowing it to drive standard TTL inputs directly.
Q: Can CD74HCT173E be used in battery-powered applications? A: Yes, CD74HCT173E can be used in battery-powered applications as it operates within a typical voltage range for portable devices.
Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.