The DS90LV004TVS/NOPB has a total of 16 pins arranged as follows:
Advantages: - High-speed data transmission capability - Low power consumption in power-down mode - Noise immunity due to LVDS technology
Disadvantages: - Limited number of channels (4) - Requires external clock signal
The DS90LV004TVS/NOPB is a LVDS Serializer/Deserializer integrated circuit. It converts parallel data into serial data for transmission over a differential LVDS link. On the receiving end, it performs the reverse operation by converting the received serial data back into parallel form.
The device utilizes low-voltage differential signaling (LVDS) technology, which provides high-speed data transmission with noise immunity. It incorporates a clock recovery circuitry that extracts the clock signal from the incoming data stream.
The DS90LV004TVS/NOPB is commonly used in various applications that require high-speed data transmission and noise immunity. Some of the typical application fields include:
These alternative models offer similar functionality to the DS90LV004TVS/NOPB and can be considered as alternatives based on specific requirements.
In conclusion, the DS90LV004TVS/NOPB is a high-speed LVDS Serializer/Deserializer IC that converts parallel data into serial data and vice versa. It offers advantages such as high-speed data transmission, low power consumption, and noise immunity. However, it has limitations in terms of the number of channels and requires an external clock signal. It finds applications in various fields including communication systems, data storage, industrial automation, medical equipment, and automotive electronics.
What is the operating voltage range of DS90LV004TVS/NOPB?
- The operating voltage range of DS90LV004TVS/NOPB is 3V to 3.6V.
What is the maximum data rate supported by DS90LV004TVS/NOPB?
- DS90LV004TVS/NOPB supports a maximum data rate of 400 Mbps.
Can DS90LV004TVS/NOPB be used in automotive applications?
- Yes, DS90LV004TVS/NOPB is suitable for automotive applications.
What is the typical common-mode voltage range of DS90LV004TVS/NOPB?
- The typical common-mode voltage range of DS90LV004TVS/NOPB is -1V to 2.4V.
Is DS90LV004TVS/NOPB compatible with LVDS standards?
- Yes, DS90LV004TVS/NOPB is fully compatible with LVDS standards.
Does DS90LV004TVS/NOPB require external termination resistors?
- Yes, DS90LV004TVS/NOPB requires external termination resistors.
Can DS90LV004TVS/NOPB be used in industrial control systems?
- Yes, DS90LV004TVS/NOPB is suitable for use in industrial control systems.
What is the power consumption of DS90LV004TVS/NOPB?
- The power consumption of DS90LV004TVS/NOPB is typically 100mW.
Is DS90LV004TVS/NOPB RoHS compliant?
- Yes, DS90LV004TVS/NOPB is RoHS compliant.
What is the package type of DS90LV004TVS/NOPB?
- DS90LV004TVS/NOPB is available in a small-outline package (SOIC).