Texas Instruments
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
SN74ALVC245NSR
عرض التفاصيل جداول البيانات

SN74ALVC245NSR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Level Shifter and Bus Transceiver
  • Characteristics: High-speed, low-power, bidirectional voltage level translator
  • Package: 20-pin small-outline integrated circuit (SOIC)
  • Essence: Transfers data between different voltage domains
  • Packaging/Quantity: Tape and reel packaging, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.65V to 3.6V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Maximum Data Rate: 400 Mbps
  • Number of Channels: 8
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The SN74ALVC245NSR has a total of 20 pins, which are divided into two groups:

Group A (Input/Output Pins)

  1. DIR (Direction Control)
  2. OE (Output Enable)
  3. A1 (Data Input/Output)
  4. A2 (Data Input/Output)
  5. A3 (Data Input/Output)
  6. A4 (Data Input/Output)
  7. A5 (Data Input/Output)
  8. A6 (Data Input/Output)

Group B (Input/Output Pins)

  1. B1 (Data Input/Output)
  2. B2 (Data Input/Output)
  3. B3 (Data Input/Output)
  4. B4 (Data Input/Output)
  5. B5 (Data Input/Output)
  6. B6 (Data Input/Output)
  7. B7 (Data Input/Output)

  8. B8 (Data Input/Output)

  9. GND (Ground)

  10. VCC (Supply Voltage)
  11. NC (No Connection)
  12. GND (Ground)

Functional Features

  • Bidirectional voltage level translation between two different voltage domains
  • Automatic direction control based on DIR pin
  • Output enable/disable control using OE pin
  • High-speed data transfer with minimal propagation delay
  • Low power consumption for energy-efficient operation
  • ESD protection for improved reliability

Advantages and Disadvantages

Advantages

  • Enables communication between devices operating at different voltage levels
  • Supports high-speed data transmission
  • Low power consumption helps prolong battery life in portable devices
  • Compact package size allows for space-saving integration
  • ESD protection ensures robustness against electrostatic discharge

Disadvantages

  • Limited to a maximum data rate of 400 Mbps
  • Requires careful consideration of voltage compatibility between input and output domains
  • May introduce signal degradation or noise due to voltage level shifting

Working Principles

The SN74ALVC245NSR acts as a bidirectional voltage level translator, allowing data transfer between two voltage domains. The direction of data flow is controlled by the DIR pin, while the OE pin enables or disables the output. When the DIR pin is set to logic high, data flows from Group A to Group B, and when it is set to logic low, data flows in the opposite direction.

The IC operates within a specified supply voltage range and translates the input data signals to the corresponding output voltage levels. It provides fast and reliable data transfer with minimal propagation delay, making it suitable for applications requiring high-speed communication between devices operating at different voltage levels.

Detailed Application Field Plans

The SN74ALVC245NSR finds application in various fields where voltage level translation is required. Some of the common application areas include:

  1. Microcontroller interfacing: Allows communication between microcontrollers operating at different voltage levels.
  2. Sensor networks: Facilitates data exchange between sensors and microcontrollers with varying voltage requirements.
  3. Industrial automation: Enables communication between different control systems operating at different voltage levels.
  4. Consumer electronics: Used in devices such as smartphones, tablets, and gaming consoles to interface components with different voltage levels.
  5. Automotive electronics: Facilitates data transfer between various automotive subsystems operating at different voltage domains.

Detailed and Complete Alternative Models

  1. TXB0108PWR: 8-bit bidirectional voltage-level translator with automatic direction control.
  2. PCA9306DCUR: Dual bidirectional I2C-bus and SMBus voltage-level translator.
  3. SN74LVC4245APW: Octal bus transceiver and voltage level shifter.
  4. CD4504BE: Hex voltage-level shifter for interfacing between TTL and CMOS logic levels.
  5. MAX3370EEKA+: Quad level translator with integrated ESD protection.

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word count: 536 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق SN74ALVC245NSR في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of SN74ALVC245NSR:

  1. Q: What is SN74ALVC245NSR? A: SN74ALVC245NSR is a type of integrated circuit (IC) commonly used as a bidirectional level shifter or voltage translator.

  2. Q: What is the purpose of using SN74ALVC245NSR in a technical solution? A: SN74ALVC245NSR is used to interface between two systems operating at different voltage levels, ensuring proper signal translation and communication.

  3. Q: What voltage levels can SN74ALVC245NSR handle? A: SN74ALVC245NSR can handle voltage levels ranging from 1.65V to 5.5V.

  4. Q: How many channels does SN74ALVC245NSR have? A: SN74ALVC245NSR has 8 bidirectional channels, allowing for simultaneous translation of multiple signals.

  5. Q: Can SN74ALVC245NSR be used for both level shifting and voltage translation? A: Yes, SN74ALVC245NSR can be used for both level shifting (e.g., 3.3V to 5V) and voltage translation (e.g., 5V to 1.8V).

  6. Q: What is the maximum data rate supported by SN74ALVC245NSR? A: SN74ALVC245NSR supports data rates up to 400 Mbps, making it suitable for high-speed applications.

  7. Q: Is SN74ALVC245NSR compatible with different logic families? A: Yes, SN74ALVC245NSR is compatible with various logic families such as TTL, CMOS, and LVCMOS.

  8. Q: Can SN74ALVC245NSR be used in both digital and analog applications? A: No, SN74ALVC245NSR is primarily designed for digital applications and may not be suitable for analog signals.

  9. Q: Does SN74ALVC245NSR require external components for operation? A: SN74ALVC245NSR requires minimal external components such as decoupling capacitors for proper power supply filtering.

  10. Q: Are there any specific layout considerations when using SN74ALVC245NSR? A: Yes, it is recommended to follow the manufacturer's guidelines for PCB layout, including proper grounding and signal integrity practices, to ensure optimal performance.

Please note that these answers are general and may vary depending on the specific application and requirements.