Texas Instruments
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
SN74ALVCH244DGVR
عرض التفاصيل جداول البيانات

SN74ALVCH244DGVR

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Buffer/Line Driver
  • Characteristics: High-speed, low-voltage, non-inverting
  • Package: TSSOP-20
  • Essence: Logic Level Translator
  • Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

  • Supply Voltage Range: 1.65V to 3.6V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Maximum Operating Frequency: 400MHz
  • Number of Channels: 8
  • Input/Output Type: Non-Inverting
  • Propagation Delay: 2.5ns (typical)

Detailed Pin Configuration

The SN74ALVCH244DGVR has a TSSOP-20 package with the following pin configuration:

__ __ A1 | 1 20 | VCC A2 | 2 19 | OE# B1 | 3 18 | B2 B2 | 4 17 | A2 A3 | 5 16 | B3 B3 | 6 15 | A3 A4 | 7 14 | B4 B4 | 8 13 | A4 GND | 9 12 | B5 OE | 10 11 | A5 ‾‾ ‾‾

Functional Features

  • High-speed operation allows for efficient data transfer.
  • Low-voltage compatibility makes it suitable for various applications.
  • Non-inverting nature ensures signal integrity is maintained.
  • 3-state outputs provide flexibility in controlling the output state.

Advantages

  • Wide supply voltage range allows for compatibility with different systems.
  • High-speed operation enables quick data transmission.
  • Non-inverting feature simplifies circuit design and reduces complexity.
  • 3-state outputs provide flexibility in bus sharing applications.

Disadvantages

  • Limited number of channels (8) may not be sufficient for certain applications requiring more inputs/outputs.
  • Propagation delay of 2.5ns may not meet the requirements of ultra-high-speed applications.

Working Principles

The SN74ALVCH244DGVR is a logic level translator that operates between two voltage domains. It takes input signals from one voltage level and translates them to another voltage level, ensuring compatibility between different parts of a system. The non-inverting nature of the device ensures that the output signal follows the input signal without any inversion. The 3-state outputs allow multiple devices to share a common bus, enabling efficient communication.

Detailed Application Field Plans

The SN74ALVCH244DGVR is commonly used in various applications, including: 1. Microprocessor-based systems 2. Data communication systems 3. Networking equipment 4. Industrial automation 5. Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the SN74ALVCH244DGVR are: 1. SN74LVC244A: Similar functionality with a wider supply voltage range. 2. SN74LVCH244A: Higher speed operation with a lower propagation delay. 3. SN74AHCT244: Compatible with higher voltage levels.

These alternative models offer similar functionality but may have different specifications or characteristics that suit specific application requirements.

Word count: 345 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق SN74ALVCH244DGVR في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of SN74ALVCH244DGVR:

  1. Q: What is SN74ALVCH244DGVR? A: SN74ALVCH244DGVR is a specific type of integrated circuit (IC) known as a buffer/line driver. It is commonly used for signal buffering and level shifting in digital circuits.

  2. Q: What is the voltage range supported by SN74ALVCH244DGVR? A: SN74ALVCH244DGVR supports a wide voltage range, typically from 1.65V to 3.6V, making it compatible with various logic families.

  3. Q: How many channels does SN74ALVCH244DGVR have? A: SN74ALVCH244DGVR has 8 channels, meaning it can buffer or drive up to 8 separate signals.

  4. Q: Can SN74ALVCH244DGVR handle bidirectional signals? A: No, SN74ALVCH244DGVR is unidirectional and can only buffer or drive signals in one direction.

  5. Q: What is the maximum data rate supported by SN74ALVCH244DGVR? A: SN74ALVCH244DGVR can support high-speed data rates up to several hundred megahertz (MHz), depending on the specific operating conditions.

  6. Q: Is SN74ALVCH244DGVR tolerant to overvoltage? A: Yes, SN74ALVCH244DGVR has built-in protection features that make it tolerant to overvoltage conditions, ensuring the safety of the IC.

  7. Q: Can I use SN74ALVCH244DGVR in automotive applications? A: Yes, SN74ALVCH244DGVR is designed to meet automotive industry standards and can be used in automotive applications.

  8. Q: What is the power supply voltage required for SN74ALVCH244DGVR? A: SN74ALVCH244DGVR typically operates with a power supply voltage of 1.65V to 3.6V, which is commonly available in many digital systems.

  9. Q: Can I use SN74ALVCH244DGVR in low-power applications? A: Yes, SN74ALVCH244DGVR is known for its low power consumption, making it suitable for battery-powered or energy-efficient devices.

  10. Q: Are there any specific layout considerations for using SN74ALVCH244DGVR? A: Yes, like most ICs, proper PCB layout techniques should be followed to minimize noise, ensure signal integrity, and optimize performance. The datasheet provides guidelines for layout recommendations.

Please note that these answers are general and may vary depending on the specific application and operating conditions. Always refer to the datasheet and consult with an expert when designing with SN74ALVCH244DGVR or any other IC.