قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
SN74AS253ADR

SN74AS253ADR

Product Overview

Category

SN74AS253ADR belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for signal processing and control.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Multiple input/output options
  • Reliable performance

Package

SN74AS253ADR is available in a dual in-line package (DIP) with 16 pins.

Essence

The essence of SN74AS253ADR lies in its ability to process and manipulate digital signals efficiently.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Supply Voltage: 4.5V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Logic Family: AS
  • Number of Inputs: 2
  • Number of Outputs: 4
  • Logic Type: Multiplexer/Demultiplexer

Detailed Pin Configuration

  1. A0 - Input A0
  2. A1 - Input A1
  3. GND - Ground
  4. Y0 - Output Y0
  5. Y1 - Output Y1
  6. Y2 - Output Y2
  7. Y3 - Output Y3
  8. VCC - Power Supply
  9. B0 - Input B0
  10. B1 - Input B1
  11. G - Enable Input
  12. C - Common Select Input
  13. Y - Output Enable Input
  14. B - Common Data Input
  15. A - Common Data Input
  16. GND - Ground

Functional Features

  • Dual 4-input multiplexer/demultiplexer
  • Independent select inputs for each multiplexer
  • Output enable input for tri-state outputs
  • High-speed operation for efficient signal processing

Advantages and Disadvantages

Advantages

  • High-speed operation allows for quick data processing
  • Low power consumption helps conserve energy
  • Wide operating voltage range ensures compatibility with various systems
  • Multiple input/output options provide flexibility in circuit design
  • Reliable performance ensures consistent functionality

Disadvantages

  • Limited number of inputs and outputs may restrict complex circuit designs
  • Requires careful handling due to sensitivity to electrostatic discharge (ESD)

Working Principles

SN74AS253ADR operates as a dual 4-input multiplexer/demultiplexer. It selects one of the two 4-bit data inputs based on the select inputs and routes it to the corresponding output. The output enable input controls the tri-state outputs, allowing them to be disabled when necessary.

Detailed Application Field Plans

SN74AS253ADR finds applications in various fields, including: 1. Data communication systems 2. Digital signal processing 3. Industrial automation 4. Automotive electronics 5. Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that can be used as substitutes for SN74AS253ADR are: 1. CD74HC153E 2. MC74HC153N 3. 74HCT153N 4. SN74LS153N 5. CD74HCT153E

These models offer similar functionality and can be used interchangeably in most applications.

Word count: 439 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق SN74AS253ADR في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of SN74AS253ADR:

  1. Q: What is SN74AS253ADR? A: SN74AS253ADR is a dual 4-input multiplexer with tri-state outputs, commonly used in digital logic circuits.

  2. Q: What is the purpose of SN74AS253ADR? A: SN74AS253ADR is used to select one of four input signals and route it to the output based on the control inputs.

  3. Q: What is the voltage range supported by SN74AS253ADR? A: SN74AS253ADR supports a voltage range of 4.5V to 5.5V.

  4. Q: How many control inputs does SN74AS253ADR have? A: SN74AS253ADR has two control inputs, typically labeled as S0 and S1.

  5. Q: What is the maximum operating frequency of SN74AS253ADR? A: The maximum operating frequency of SN74AS253ADR is typically around 25 MHz.

  6. Q: Can SN74AS253ADR be used for bidirectional data transmission? A: No, SN74AS253ADR is a unidirectional multiplexer and cannot be used for bidirectional data transmission.

  7. Q: What is the output configuration of SN74AS253ADR? A: SN74AS253ADR has two independent tri-state outputs, typically labeled as Y1 and Y2.

  8. Q: Can SN74AS253ADR handle analog signals? A: No, SN74AS253ADR is designed for digital signals and is not suitable for handling analog signals.

  9. Q: What is the power supply requirement for SN74AS253ADR? A: SN74AS253ADR requires a single power supply voltage of 5V.

  10. Q: Can SN74AS253ADR be cascaded to increase the number of inputs? A: Yes, multiple SN74AS253ADR chips can be cascaded together to increase the number of inputs and outputs in a system.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.