Texas Instruments
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
SN74HC163PW
عرض التفاصيل جداول البيانات

SN74HC163PW

Product Overview

Category

SN74HC163PW belongs to the category of integrated circuits (ICs).

Use

It is commonly used in digital electronics for various applications such as counters, registers, and data storage.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with TTL (Transistor-Transistor Logic) inputs
  • Output drive capability

Package

SN74HC163PW is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of SN74HC163PW lies in its ability to perform high-speed counting and data storage functions in digital circuits.

Packaging/Quantity

SN74HC163PW is typically packaged in reels or tubes, with a quantity of 2500 units per reel or tube.

Specifications

  • Supply Voltage: 2V to 6V
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Clock Frequency: 50 MHz
  • Number of Counting Stages: 4
  • Input/Output Type: CMOS (Complementary Metal-Oxide-Semiconductor)
  • Package Type: SOIC-16

Detailed Pin Configuration

  1. CLK (Clock Input)
  2. MR (Master Reset Input)
  3. CP (Clock Pulse Input)
  4. CE (Count Enable Input)
  5. Q0 (Least Significant Bit Output)
  6. Q1 (Output)
  7. Q2 (Output)
  8. Q3 (Most Significant Bit Output)
  9. GND (Ground)
  10. VCC (Supply Voltage)
  11. D0 (Data Input)
  12. D1 (Input)
  13. D2 (Input)
  14. D3 (Input)
  15. TC (Terminal Count Output)
  16. PE (Parallel Enable Input)

Functional Features

  • Synchronous operation
  • Parallel load capability
  • Ripple carry output for cascading multiple counters
  • Asynchronous master reset
  • Terminal count output for indicating the completion of a counting cycle

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient counting and data storage.
  • Low power consumption makes it suitable for battery-powered devices.
  • Wide operating voltage range provides flexibility in various applications.
  • Compatibility with TTL inputs enables easy integration into existing systems.
  • Output drive capability ensures reliable signal transmission.

Disadvantages

  • Limited number of counting stages (4 in this case) may not be sufficient for certain complex applications.
  • CMOS technology, while offering advantages, can be susceptible to noise interference.

Working Principles

SN74HC163PW operates as a synchronous 4-bit binary counter. The clock input (CLK) triggers the counter to increment its value by one on each rising edge. The count enable input (CE) determines whether the counter is enabled or disabled. When enabled, the counter counts; when disabled, it holds its current value. The parallel enable input (PE) allows for parallel loading of data into the counter. The master reset input (MR) asynchronously resets the counter to its initial state.

Detailed Application Field Plans

SN74HC163PW finds applications in various fields, including: 1. Digital frequency dividers 2. Event counters 3. Industrial automation 4. Communication systems 5. Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to SN74HC163PW are: 1. CD40163BE 2. MC74HC163N 3. 74HCT163

These models can be considered as alternatives based on their comparable specifications and pin configurations.

Word count: 550 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق SN74HC163PW في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of SN74HC163PW:

  1. Q: What is SN74HC163PW? A: SN74HC163PW is a 4-bit synchronous binary counter IC (integrated circuit) that can be used in various technical solutions.

  2. Q: What is the maximum clock frequency supported by SN74HC163PW? A: The maximum clock frequency supported by SN74HC163PW is typically around 50 MHz.

  3. Q: How many outputs does SN74HC163PW have? A: SN74HC163PW has four outputs, representing the four bits of the binary counter.

  4. Q: Can SN74HC163PW be cascaded to create larger counters? A: Yes, multiple SN74HC163PW ICs can be cascaded together to create larger counters with more bits.

  5. Q: What is the power supply voltage range for SN74HC163PW? A: SN74HC163PW operates with a power supply voltage range of 2V to 6V.

  6. Q: Does SN74HC163PW have any built-in error detection or correction features? A: No, SN74HC163PW does not have any built-in error detection or correction features. It is a basic binary counter.

  7. Q: Can SN74HC163PW be used in both synchronous and asynchronous modes? A: No, SN74HC163PW is designed to operate only in synchronous mode.

  8. Q: What is the typical propagation delay of SN74HC163PW? A: The typical propagation delay of SN74HC163PW is around 15 ns.

  9. Q: Is SN74HC163PW suitable for high-speed applications? A: Yes, SN74HC163PW is suitable for high-speed applications due to its relatively fast operation.

  10. Q: Can SN74HC163PW be used in both digital and analog circuits? A: No, SN74HC163PW is specifically designed for digital circuits and is not suitable for analog applications.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.