Texas Instruments
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
SN74LVTH16952DLG4
عرض التفاصيل جداول البيانات

SN74LVTH16952DLG4

Product Overview

Category

The SN74LVTH16952DLG4 belongs to the category of integrated circuits, specifically a 16-bit registered transceiver.

Use

This product is commonly used for data transmission and reception in various digital systems, including computers, communication equipment, and industrial control systems.

Characteristics

  • High-speed operation
  • Low power consumption
  • 3-state outputs
  • Wide operating voltage range
  • ESD protection exceeds 2000 V per MIL-STD-883, Method 3015

Package

The SN74LVTH16952DLG4 is available in a TSSOP (Thin Shrink Small Outline Package) with 56 pins.

Essence

The essence of this product lies in its ability to efficiently transmit and receive digital data while consuming minimal power.

Packaging/Quantity

It is typically packaged in reels and available in quantities suitable for both prototyping and production purposes.

Specifications

  • Operating Voltage Range: 2 V to 3.6 V
  • Input and Output Voltage Levels: 5.5 V
  • Maximum Propagation Delay: 3.8 ns
  • Operating Temperature Range: -40°C to 85°C
  • Power Consumption: Low power dissipation

Detailed Pin Configuration

The detailed pin configuration of the SN74LVTH16952DLG4 can be found in the manufacturer's datasheet.

Functional Features

  • 16-bit registered transceiver
  • 3-state outputs for bus-oriented applications
  • Non-inverting data path for easy cascading
  • Flow-through architecture optimizes PCB layout

Advantages and Disadvantages

Advantages

  • High-speed operation enables rapid data transmission
  • Low power consumption reduces energy usage
  • Wide operating voltage range enhances versatility
  • ESD protection ensures robustness in various environments

Disadvantages

  • Limited to 16-bit data transmission
  • Requires careful consideration of signal integrity due to high-speed operation

Working Principles

The SN74LVTH16952DLG4 operates by receiving input data on one set of pins, registering it internally, and then transmitting the data on another set of pins. The 3-state outputs allow the device to be effectively connected to a bus structure, enabling efficient data transfer.

Detailed Application Field Plans

This product is well-suited for use in: - Computer systems for data buses - Communication equipment for signal transmission - Industrial control systems for interfacing with sensors and actuators

Detailed and Complete Alternative Models

  • SN74LVTH16952DGG
  • SN74LVTH16952DGGR
  • SN74LVTH16952DL
  • SN74LVTH16952DLR

In conclusion, the SN74LVTH16952DLG4 is a versatile and efficient 16-bit registered transceiver that offers high-speed operation, low power consumption, and wide compatibility, making it an ideal choice for various digital systems.

[Word Count: 410]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق SN74LVTH16952DLG4 في الحلول التقنية

  1. What is the SN74LVTH16952DLG4?

    • The SN74LVTH16952DLG4 is a 16-bit registered transceiver with 3-state outputs, designed for asynchronous communication between two data buses.

  2. What is the operating voltage range of SN74LVTH16952DLG4?

    • The operating voltage range is 2 V to 3.6 V, making it suitable for low-voltage applications.

  3. What are the typical applications of SN74LVTH16952DLG4?

    • It is commonly used in applications such as level shifting, signal buffering, and data bus isolation in various electronic systems.

  4. What is the maximum data transfer rate supported by SN74LVTH16952DLG4?

    • The maximum data transfer rate is typically 400 Mbps, making it suitable for high-speed data transmission.

  5. Does SN74LVTH16952DLG4 support hot insertion?

    • Yes, it supports hot insertion, allowing for easy integration into existing systems without disrupting operation.

  6. What are the key features of SN74LVTH16952DLG4?

    • Some key features include 3-state outputs, flow-through pinout for easy PCB layout, and latch-up performance exceeding 100 mA per JESD 78.

  7. Can SN74LVTH16952DLG4 be used in automotive applications?

    • Yes, it is AEC-Q100 qualified and suitable for use in automotive electronics.

  8. What is the power consumption of SN74LVTH16952DLG4?

    • The typical power consumption is low, making it suitable for battery-powered devices and energy-efficient designs.

  9. Is SN74LVTH16952DLG4 compatible with other logic families?

    • Yes, it is compatible with TTL, LVTTL, and LVCMOS logic levels, providing versatility in system design.

  10. Are there any application notes or reference designs available for SN74LVTH16952DLG4?

    • Yes, Texas Instruments provides comprehensive application notes and reference designs to assist with integrating SN74LVTH16952DLG4 into technical solutions.