Texas Instruments
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
TAS5414TDKDRMQ1
عرض التفاصيل جداول البيانات

TAS5414TDKDRMQ1

Product Overview

Category

TAS5414TDKDRMQ1 belongs to the category of integrated circuits (ICs).

Use

This product is primarily used in automotive audio systems for amplification purposes.

Characteristics

  • High-performance quad-channel digital amplifier
  • Designed specifically for automotive applications
  • Offers excellent audio quality and efficiency
  • Supports a wide range of input and output configurations

Package

TAS5414TDKDRMQ1 comes in a small outline package (SOP) with 44 pins.

Essence

The essence of this product lies in its ability to provide high-quality audio amplification in automotive environments, ensuring an enhanced listening experience for passengers.

Packaging/Quantity

The product is typically packaged in reels and available in quantities suitable for mass production.

Specifications

  • Power Supply Voltage: 6V - 18V
  • Output Power: 45W per channel (at 10% THD+N)
  • Total Harmonic Distortion + Noise (THD+N): <0.02%
  • Signal-to-Noise Ratio (SNR): >100dB
  • Operating Temperature Range: -40°C to 105°C

Detailed Pin Configuration

  1. OUT1A
  2. OUT1B
  3. GND
  4. VDD
  5. IN1A
  6. IN1B
  7. MUTE
  8. STBY
  9. BTL1
  10. NC
  11. OUT2A
  12. OUT2B
  13. GND
  14. VDD
  15. IN2A
  16. IN2B
  17. MUTE
  18. STBY
  19. BTL2
  20. NC
  21. OUT3A
  22. OUT3B
  23. GND
  24. VDD
  25. IN3A
  26. IN3B
  27. MUTE
  28. STBY
  29. BTL3
  30. NC
  31. OUT4A
  32. OUT4B
  33. GND
  34. VDD
  35. IN4A
  36. IN4B
  37. MUTE
  38. STBY
  39. BTL4
  40. NC
  41. PVCC
  42. PGND
  43. NC
  44. NC

Functional Features

  • Four independent channels for flexible audio system design
  • Built-in protection features such as over-temperature and short-circuit protection
  • Low quiescent current consumption for improved energy efficiency
  • Integrated diagnostic and fault reporting capabilities

Advantages and Disadvantages

Advantages

  • High-quality audio amplification
  • Automotive-grade reliability and durability
  • Flexible input and output configurations
  • Comprehensive protection features

Disadvantages

  • Relatively higher cost compared to traditional analog amplifiers
  • Requires additional digital signal processing for optimal performance

Working Principles

TAS5414TDKDRMQ1 operates on the principle of converting digital audio signals into amplified analog signals using pulse width modulation (PWM) techniques. The digital input signals are processed by an internal digital signal processor (DSP), which controls the PWM modulator to generate the amplified output signals.

Detailed Application Field Plans

This product is widely used in various automotive audio systems, including car stereos, infotainment systems, and premium sound systems. It can be integrated into both original equipment manufacturer (OEM) and aftermarket audio systems.

Detailed and Complete Alternative Models

  • TAS5412TDKDRMQ1: Dual-channel version of TAS5414TDKDRMQ1
  • TAS5424TDKDRMQ1: Quad-channel digital amplifier with enhanced power output
  • TAS5432TDKDRMQ1: Dual-channel digital amplifier with advanced diagnostic features

These alternative models offer similar functionality and can be considered as alternatives based on specific application requirements.

Word count: 515 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق TAS5414TDKDRMQ1 في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of TAS5414TDKDRMQ1 in technical solutions:

Q1: What is TAS5414TDKDRMQ1? A1: TAS5414TDKDRMQ1 is a four-channel digital audio amplifier from Texas Instruments, designed for automotive applications.

Q2: What is the power output of TAS5414TDKDRMQ1? A2: TAS5414TDKDRMQ1 can deliver up to 45 watts per channel into a 4-ohm load.

Q3: What is the input voltage range of TAS5414TDKDRMQ1? A3: The input voltage range of TAS5414TDKDRMQ1 is typically between 4.5V and 26V.

Q4: Can TAS5414TDKDRMQ1 be used in a car audio system? A4: Yes, TAS5414TDKDRMQ1 is specifically designed for automotive audio applications, making it suitable for car audio systems.

Q5: Does TAS5414TDKDRMQ1 support multiple audio inputs? A5: Yes, TAS5414TDKDRMQ1 has four independent audio inputs, allowing for multiple audio sources.

Q6: Is TAS5414TDKDRMQ1 compatible with digital audio interfaces? A6: Yes, TAS5414TDKDRMQ1 supports various digital audio interfaces such as I2S, TDM, and PDM.

Q7: Can TAS5414TDKDRMQ1 operate at high temperatures? A7: Yes, TAS5414TDKDRMQ1 is designed to operate reliably at high temperatures, making it suitable for automotive environments.

Q8: Does TAS5414TDKDRMQ1 have built-in protection features? A8: Yes, TAS5414TDKDRMQ1 includes protection features like over-temperature protection, short-circuit protection, and over-voltage protection.

Q9: Can TAS5414TDKDRMQ1 be used in other applications besides automotive audio? A9: While TAS5414TDKDRMQ1 is primarily designed for automotive audio, it can also be used in other audio applications that require a high-power amplifier.

Q10: What is the package type of TAS5414TDKDRMQ1? A10: TAS5414TDKDRMQ1 comes in a thermally enhanced HTSSOP package, which helps with heat dissipation in automotive applications.