TPS2071DAPG4
Introduction
The TPS2071DAPG4 is a product belonging to the category of power distribution switches. This device is commonly used in electronic circuits to control the distribution of power to various components. It possesses specific characteristics, packaging, and quantity details that make it suitable for a wide range of applications.
Basic Information Overview
- Category: Power Distribution Switch
- Use: Control the distribution of power in electronic circuits
- Characteristics: High efficiency, low power dissipation, overcurrent protection
- Package: 8-pin HTSSOP package
- Essence: Efficient power management in electronic systems
- Packaging/Quantity: Tape and reel packaging, available in quantities of 2500 units per reel
Specifications
- Input Voltage Range: 2.7V to 5.5V
- Output Current: 500mA
- Quiescent Current: 30µA
- Operating Temperature Range: -40°C to 85°C
- Overcurrent Protection Threshold: Adjustable
Detailed Pin Configuration
The TPS2071DAPG4 features the following pin configuration: 1. EN (Enable) 2. IN (Input) 3. OUT (Output) 4. GND (Ground) 5. OCSET (Overcurrent Set) 6. FAULT (Fault Indicator) 7. ILIM (Current Limit) 8. VCC (Voltage Input)
Functional Features
- Overcurrent protection with adjustable threshold
- Low quiescent current for minimal power dissipation
- Enable pin for easy control of power distribution
- Fault indicator for quick identification of issues
Advantages and Disadvantages
Advantages
- Efficient power management
- Adjustable overcurrent protection
- Low power dissipation
Disadvantages
- Limited output current capacity
- Restricted input voltage range
Working Principles
The TPS2071DAPG4 operates by monitoring the current flow through its output and adjusting the distribution of power based on the set overcurrent protection threshold. When an overcurrent condition is detected, the device disables the output to protect the circuit components.
Detailed Application Field Plans
The TPS2071DAPG4 is well-suited for various applications, including: - Portable electronic devices - Battery-powered systems - USB-powered peripherals - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models to the TPS2071DAPG4 include: - TPS2065DGNR - TPS2051BDBVR - TPS22968
In conclusion, the TPS2071DAPG4 is a versatile power distribution switch with efficient control features, making it suitable for a wide range of electronic applications.
Word Count: 366
قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق TPS2071DAPG4 في الحلول التقنية
What is TPS2071DAPG4?
- TPS2071DAPG4 is a power distribution switch with an integrated current-limiting feature, designed to provide protection to systems from overcurrent and short-circuit conditions.
What is the input voltage range of TPS2071DAPG4?
- The input voltage range of TPS2071DAPG4 is 2.7V to 5.5V.
What is the maximum continuous current that TPS2071DAPG4 can handle?
- TPS2071DAPG4 can handle a maximum continuous current of 500mA.
What is the typical quiescent current of TPS2071DAPG4?
- The typical quiescent current of TPS2071DAPG4 is 30µA.
What is the thermal shutdown temperature of TPS2071DAPG4?
- The thermal shutdown temperature of TPS2071DAPG4 is 150°C.
What are the typical applications of TPS2071DAPG4?
- TPS2071DAPG4 is commonly used in USB ports, portable electronics, and other applications where overcurrent protection is required.
Does TPS2071DAPG4 have built-in reverse current blocking?
- Yes, TPS2071DAPG4 has built-in reverse current blocking to prevent backflow of current.
What is the package type of TPS2071DAPG4?
- TPS2071DAPG4 comes in a small 6-pin SOT-23 package.
Can TPS2071DAPG4 be used in automotive applications?
- Yes, TPS2071DAPG4 is suitable for automotive applications due to its wide input voltage range and robust protection features.
Is TPS2071DAPG4 RoHS compliant?
- Yes, TPS2071DAPG4 is RoHS compliant, making it suitable for use in environmentally sensitive applications.