Texas Instruments
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
TPS3514DR
عرض التفاصيل جداول البيانات

TPS3514DR

Product Overview

Category

The TPS3514DR belongs to the category of integrated circuits (ICs) and specifically falls under the power management ICs.

Use

This product is primarily used for power supply and battery management applications in various electronic devices.

Characteristics

  • The TPS3514DR is a highly efficient power management IC that offers advanced features.
  • It provides precise voltage regulation and monitoring capabilities.
  • This IC incorporates multiple protection mechanisms to ensure safe operation.
  • It is designed to optimize power consumption and extend battery life in portable devices.

Package

The TPS3514DR is available in a small outline package (SOP) with 8 pins.

Essence

The essence of the TPS3514DR lies in its ability to efficiently manage power supply and battery usage, ensuring optimal performance and extended battery life in electronic devices.

Packaging/Quantity

The TPS3514DR is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 1.2V to 3.6V
  • Operating Temperature Range: -40°C to 85°C
  • Quiescent Current: 10µA (typical)
  • Overvoltage Protection Threshold: 5.5V (typical)
  • Undervoltage Lockout Threshold: 2.5V (typical)

Detailed Pin Configuration

The TPS3514DR has the following pin configuration:

  1. EN (Enable): Controls the device's operation.
  2. VIN (Input Voltage): Connects to the power source.
  3. VOUT (Output Voltage): Provides regulated output voltage.
  4. GND (Ground): Common ground reference.
  5. PG (Power Good): Indicates the status of the output voltage.
  6. FLT (Fault): Signals any fault conditions.
  7. VBAT (Battery Voltage): Connects to the battery.
  8. VREF (Reference Voltage): Provides a stable reference voltage.

Functional Features

  • Power supply voltage regulation and monitoring.
  • Battery voltage monitoring and protection.
  • Overvoltage and undervoltage protection.
  • Power sequencing and power-on reset functionality.
  • Fault detection and reporting.
  • Low quiescent current for power efficiency.

Advantages and Disadvantages

Advantages

  • Highly efficient power management capabilities.
  • Precise voltage regulation and monitoring.
  • Multiple protection mechanisms ensure safe operation.
  • Optimizes power consumption and extends battery life.
  • Compact package size suitable for portable devices.

Disadvantages

  • Limited input voltage range (2.7V to 5.5V).
  • Operating temperature range may not be suitable for extreme environments.

Working Principles

The TPS3514DR operates by regulating the input voltage and providing a stable output voltage. It continuously monitors the input and output voltages, ensuring they remain within specified ranges. The IC incorporates various protection features such as overvoltage and undervoltage protection, which safeguard the connected device and battery. Additionally, it provides power sequencing and fault detection capabilities to enhance system reliability.

Detailed Application Field Plans

The TPS3514DR finds applications in a wide range of electronic devices, including but not limited to: - Smartphones and tablets - Portable gaming consoles - Wearable devices - IoT (Internet of Things) devices - Portable medical devices - Handheld measurement instruments

Detailed and Complete Alternative Models

  1. TPS3510DR: Similar to TPS3514DR, but with a different pin configuration.
  2. TPS3512DR: Offers similar functionality with additional features like temperature monitoring.
  3. TPS3516DR: Provides enhanced power management capabilities with increased input voltage range.

These alternative models offer similar functionality to the TPS3514DR, catering to different requirements and specifications.

Word count: 530 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق TPS3514DR في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of TPS3514DR in technical solutions:

  1. Q: What is TPS3514DR? A: TPS3514DR is a power management IC (integrated circuit) that provides various functions such as voltage monitoring, watchdog timer, and power sequencing.

  2. Q: What are the typical applications of TPS3514DR? A: TPS3514DR is commonly used in industrial automation, automotive systems, consumer electronics, and other applications where reliable power management is required.

  3. Q: How does TPS3514DR monitor voltages? A: TPS3514DR monitors voltages by comparing them to user-defined thresholds. It can detect undervoltage and overvoltage conditions and trigger appropriate actions.

  4. Q: What is the purpose of the watchdog timer in TPS3514DR? A: The watchdog timer in TPS3514DR ensures system reliability by monitoring the activity of the microcontroller or processor. If the system hangs or stops responding, the watchdog timer can reset it.

  5. Q: Can TPS3514DR control power sequencing in a system? A: Yes, TPS3514DR has built-in power sequencing capabilities. It can control the order in which different power supplies turn on/off to ensure proper system operation.

  6. Q: Does TPS3514DR have any built-in protection features? A: Yes, TPS3514DR includes protection features such as thermal shutdown, short-circuit protection, and reverse current protection to safeguard the system from damage.

  7. Q: What is the operating voltage range of TPS3514DR? A: TPS3514DR operates within a voltage range of typically 2.7V to 5.5V, making it compatible with a wide range of power supply voltages.

  8. Q: Can TPS3514DR be used in battery-powered applications? A: Yes, TPS3514DR is suitable for battery-powered applications as it has low quiescent current and can operate efficiently with limited power resources.

  9. Q: Is TPS3514DR programmable or configurable? A: TPS3514DR is a fixed-function IC, meaning its behavior is determined by its internal circuitry and cannot be programmed or configured by the user.

  10. Q: Are there any evaluation boards or reference designs available for TPS3514DR? A: Yes, Texas Instruments provides evaluation boards and reference designs for TPS3514DR, which can help users quickly prototype and integrate the IC into their systems.

Please note that the answers provided here are general and may vary depending on specific product documentation and datasheets.