TS5A2066DCUR

Product Overview

• Category: Integrated Circuit (IC)
• Use: Analog Switch
• Characteristics: Low ON-state resistance, low leakage current, wide voltage range
• Package: 14-pin VSSOP package
• Essence: High-performance analog switch
• Packaging/Quantity: Tape and reel packaging, 2500 units per reel

Specifications

• Supply Voltage Range: 1.65V to 5.5V
• ON-state Resistance: 0.4Ω (typical)
• Leakage Current: 1nA (maximum)
• Bandwidth: 200MHz
• Number of Channels: 1
• Control Inputs: 2
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The TS5A2066DCUR has a 14-pin VSSOP package with the following pin configuration:

1. IN1: Input control signal 1
2. IN2: Input control signal 2
3. GND: Ground
4. COM: Common terminal
5. NO: Normally open terminal
6. NC: Normally closed terminal
7. VDD: Positive supply voltage
8. VDD: Positive supply voltage
9. NC: Not connected
10. NC: Not connected
11. NC: Not connected
12. NC: Not connected
13. NC: Not connected
14. NC: Not connected

Functional Features

• Low ON-state resistance allows for minimal signal distortion.
• Low leakage current ensures accurate signal switching.
• Wide voltage range enables compatibility with various systems.
• Fast switching speed minimizes signal delay.

Advantages and Disadvantages

Advantages: - High-performance analog switch - Low ON-state resistance - Low leakage current - Wide voltage range - Fast switching speed

Disadvantages: - Limited number of channels (1) - Limited control inputs (2)

Working Principles

The TS5A2066DCUR is an analog switch that operates based on the control signals applied to its input pins. When the control signals are in the appropriate logic state, the switch connects the common terminal (COM) to either the normally open terminal (NO) or the normally closed terminal (NC). This allows for the routing of analog signals through the switch.

Detailed Application Field Plans

The TS5A2066DCUR can be used in various applications, including:

1. Audio Systems: The low ON-state resistance and low leakage current make it suitable for audio signal routing in amplifiers, mixers, and audio interfaces.
2. Communication Systems: It can be used for signal switching in telecommunication devices, such as routers, modems, and switches.
3. Test and Measurement Equipment: The wide voltage range and fast switching speed make it ideal for use in oscilloscopes, function generators, and data acquisition systems.
4. Industrial Control Systems: It can be employed in industrial automation systems for signal routing and control purposes.

Detailed and Complete Alternative Models

1. TS5A2066DCKR: Similar specifications and features, but in a smaller 8-pin SC70 package.
2. TS5A2066YZPR: Higher bandwidth (400MHz) version with similar characteristics and pin configuration.
3. TS5A2066RSER: Enhanced ESD protection variant with similar specifications and functionality.

(Note: These alternative models are provided for reference and may have slight differences in package type, pin configuration, or additional features.)

This entry provides comprehensive information about the TS5A2066DCUR analog switch. Its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models are covered.