Texas Instruments
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
UA733CDG4
عرض التفاصيل جداول البيانات

UA733CDG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: High-performance, low-power, wide bandwidth
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: The UA733CDG4 is a high-speed operational amplifier designed for general-purpose applications.
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Supply Voltage: ±5V to ±18V
  • Input Offset Voltage: 2mV (maximum)
  • Input Bias Current: 20nA (maximum)
  • Input Offset Current: 1nA (maximum)
  • Gain Bandwidth Product: 10MHz (typical)
  • Slew Rate: 10V/µs (typical)
  • Output Current: 25mA (minimum)
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The UA733CDG4 has a total of 14 pins. Here is the detailed pin configuration:

  1. Offset Null
  2. Inverting Input (-)
  3. Non-Inverting Input (+)
  4. V-
  5. Output
  6. Compensation
  7. V+
  8. NC (No Connection)
  9. NC
  10. NC
  11. NC
  12. NC
  13. NC
  14. Offset Null

Functional Features

  • High gain and wide bandwidth make it suitable for various applications.
  • Low input offset voltage and bias current ensure accurate signal processing.
  • Fast slew rate enables quick response to input changes.
  • High output current capability allows driving low impedance loads.

Advantages and Disadvantages

Advantages: - High performance and low power consumption. - Wide operating temperature range. - Versatile and suitable for various applications.

Disadvantages: - Limited output current compared to some specialized operational amplifiers. - Higher input offset voltage compared to precision amplifiers.

Working Principles

The UA733CDG4 is a voltage feedback operational amplifier. It amplifies the difference between its inverting and non-inverting inputs. The gain is determined by external resistors connected to the inputs. It operates on a dual power supply, allowing both positive and negative voltage swings.

Application Field Plans

The UA733CDG4 can be used in various applications, including but not limited to: - Audio amplifiers - Signal conditioning circuits - Active filters - Instrumentation amplifiers - Voltage-controlled oscillators

Alternative Models

Here are some alternative models that can be considered as substitutes for the UA733CDG4: - LM741 - TL071 - AD822

Note: This is not an exhaustive list, and there are many other alternatives available in the market.

Word count: 275 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق UA733CDG4 في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of UA733CDG4 in technical solutions:

  1. Q: What is UA733CDG4? A: UA733CDG4 is a high-performance operational amplifier (op-amp) designed for use in precision applications.

  2. Q: What are the key features of UA733CDG4? A: Some key features of UA733CDG4 include low offset voltage, low input bias current, high open-loop gain, and wide bandwidth.

  3. Q: What are the typical applications of UA733CDG4? A: UA733CDG4 is commonly used in applications such as active filters, instrumentation amplifiers, data acquisition systems, and precision voltage references.

  4. Q: What is the supply voltage range for UA733CDG4? A: The supply voltage range for UA733CDG4 is typically ±5V to ±18V.

  5. Q: What is the input voltage range of UA733CDG4? A: The input voltage range of UA733CDG4 is typically equal to the supply voltage range.

  6. Q: What is the output voltage swing of UA733CDG4? A: The output voltage swing of UA733CDG4 is typically within a few millivolts of the supply voltage range.

  7. Q: Can UA733CDG4 operate with a single power supply? A: Yes, UA733CDG4 can be operated with a single power supply by connecting the negative supply pin to ground.

  8. Q: Does UA733CDG4 have built-in protection features? A: No, UA733CDG4 does not have built-in protection features. External protection circuitry may be required depending on the application.

  9. Q: What is the temperature range for UA733CDG4? A: The temperature range for UA733CDG4 is typically -40°C to +85°C.

  10. Q: Is UA733CDG4 available in different package options? A: Yes, UA733CDG4 is available in various package options such as SOIC-8 and PDIP-8.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications or manufacturer recommendations.