قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
XC6108C12BGR-G

XC6108C12BGR-G

Product Overview

Category

XC6108C12BGR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 1.2V
  • Maximum Output Current: 150mA
  • Low Dropout Voltage: 200mV (typical)
  • Low Quiescent Current: 30μA (typical)
  • Thermal Shutdown Protection
  • Short Circuit Protection

Package

XC6108C12BGR-G is available in a small SOT-23-5 package.

Essence

The essence of XC6108C12BGR-G is to provide a stable and regulated output voltage for electronic devices.

Packaging/Quantity

It is typically packaged in reels, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 1.2V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: SOT-23-5

Detailed Pin Configuration

XC6108C12BGR-G has five pins arranged as follows:

```


| | --| |-- |____| ```

Pin 1: Enable (EN) Pin 2: Ground (GND) Pin 3: Feedback (FB) Pin 4: Output (OUT) Pin 5: Input (IN)

Functional Features

  • Voltage Regulation: XC6108C12BGR-G provides a stable output voltage of 1.2V, regardless of input voltage fluctuations.
  • Low Dropout Voltage: The regulator has a low dropout voltage of 200mV, ensuring efficient power conversion even with low input voltages.
  • Thermal Shutdown Protection: It incorporates thermal shutdown protection to prevent damage due to excessive heat.
  • Short Circuit Protection: The device is equipped with short circuit protection, safeguarding the circuit from damage in case of a short circuit.

Advantages and Disadvantages

Advantages

  • Wide input voltage range allows for flexibility in various applications.
  • Low quiescent current minimizes power consumption.
  • Small package size enables space-saving designs.
  • Thermal shutdown and short circuit protection enhance reliability.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Fixed output voltage may not be adjustable for specific requirements.

Working Principles

XC6108C12BGR-G operates based on a voltage regulation principle. It compares the feedback voltage (FB) with a reference voltage to generate an error signal. This error signal is then used to adjust the output voltage to the desired level. The internal circuitry ensures stability and protection against thermal and short circuit conditions.

Detailed Application Field Plans

XC6108C12BGR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Embedded systems - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C12BGR-G are: - LM1117-1.2 - MCP1700-120 - LP2985-1.2 - TPS78230

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 420

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6108C12BGR-G في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of XC6108C12BGR-G in technical solutions:

  1. Q: What is XC6108C12BGR-G? A: XC6108C12BGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6108C12BGR-G? A: The operating voltage range of XC6108C12BGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108C12BGR-G help in technical solutions? A: XC6108C12BGR-G helps in technical solutions by ensuring stable operation of electronic devices by monitoring the power supply voltage and providing a reset signal when necessary.

  4. Q: Can XC6108C12BGR-G be used in battery-powered applications? A: Yes, XC6108C12BGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  5. Q: What is the output type of XC6108C12BGR-G? A: XC6108C12BGR-G has an open-drain output type, which means it can be connected to other devices with different voltage levels.

  6. Q: What is the typical reset threshold voltage of XC6108C12BGR-G? A: The typical reset threshold voltage of XC6108C12BGR-G is 1.2V.

  7. Q: Is XC6108C12BGR-G suitable for automotive applications? A: Yes, XC6108C12BGR-G is suitable for automotive applications as it can operate in a wide temperature range of -40°C to +105°C.

  8. Q: Can XC6108C12BGR-G be used in industrial control systems? A: Yes, XC6108C12BGR-G can be used in industrial control systems as it has a high noise immunity and stable operation in harsh environments.

  9. Q: Does XC6108C12BGR-G have any built-in delay time for the reset signal? A: Yes, XC6108C12BGR-G has a built-in delay time of typically 200ms to prevent false resets during power supply fluctuations.

  10. Q: What package does XC6108C12BGR-G come in? A: XC6108C12BGR-G comes in a small SOT-25 package, which is compact and suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.