قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
XC6118C20AMR-G

XC6118C20AMR-G

Product Overview

Category

XC6118C20AMR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: The XC6118C20AMR-G comes in a small surface-mount package.
  • Essence: This voltage regulator is designed to provide stable and regulated output voltage.
  • Packaging/Quantity: It is typically sold in reels or tubes, with a specific quantity per package.

Specifications

The specifications of XC6118C20AMR-G are as follows:

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.0V
  • Output Current: Up to 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The pin configuration of XC6118C20AMR-G is as follows:

```


| | --| VIN VOUT |-- --| GND EN |-- |___________| ```

  • VIN: Input voltage pin
  • VOUT: Output voltage pin
  • GND: Ground pin
  • EN: Enable pin (optional)

Functional Features

  • Low Dropout Voltage: The XC6118C20AMR-G has a low dropout voltage, ensuring efficient regulation even when the input voltage is close to the desired output voltage.
  • Low Quiescent Current: With a low quiescent current, this voltage regulator minimizes power consumption when the load is light.
  • Thermal Shutdown Protection: It incorporates thermal shutdown protection to prevent damage due to excessive heat.
  • Short Circuit Protection: The XC6118C20AMR-G is equipped with short circuit protection, safeguarding the circuit from damage in case of a short circuit.

Advantages and Disadvantages

Advantages

  • Compact size and surface-mount package make it suitable for space-constrained applications.
  • Low dropout voltage ensures efficient regulation.
  • Low quiescent current minimizes power consumption.
  • Thermal shutdown and short circuit protection enhance reliability.

Disadvantages

  • Limited output current capacity (up to 100mA).
  • Input voltage range is relatively narrow (2.5V - 6.0V).

Working Principles

The XC6118C20AMR-G operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The internal circuitry monitors the output voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

The XC6118C20AMR-G can be used in various electronic applications, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Embedded systems - Automotive electronics

Alternative Models

Some alternative models that offer similar functionality to XC6118C20AMR-G are: - XC6118C20AMR-G-ND - XC6118C20AMR-G-CT - XC6118C20AMR-G-F

These models may have slight variations in package type, temperature range, or other specifications, but they serve the same purpose of voltage regulation.

In conclusion, the XC6118C20AMR-G is a compact voltage regulator with low dropout voltage, low quiescent current, and various protection features. It finds applications in diverse electronic devices and has alternative models available for specific requirements.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6118C20AMR-G في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of XC6118C20AMR-G in technical solutions:

  1. Q: What is XC6118C20AMR-G? A: XC6118C20AMR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6118C20AMR-G? A: The operating voltage range of XC6118C20AMR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6118C20AMR-G help in technical solutions? A: XC6118C20AMR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.

  4. Q: What is the typical reset threshold voltage of XC6118C20AMR-G? A: The typical reset threshold voltage of XC6118C20AMR-G is 2.0V.

  5. Q: Can XC6118C20AMR-G be used in battery-powered applications? A: Yes, XC6118C20AMR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.

  6. Q: Does XC6118C20AMR-G have any built-in delay for the reset signal? A: Yes, XC6118C20AMR-G has a built-in delay of approximately 200ms to ensure stable power supply before releasing the reset signal.

  7. Q: Is XC6118C20AMR-G suitable for automotive applications? A: Yes, XC6118C20AMR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  8. Q: Can XC6118C20AMR-G be used in industrial control systems? A: Yes, XC6118C20AMR-G can be used in industrial control systems to ensure reliable operation by monitoring the power supply voltage.

  9. Q: Does XC6118C20AMR-G have any additional features or protection mechanisms? A: Yes, XC6118C20AMR-G has built-in overvoltage protection and hysteresis to prevent false triggering and ensure stable operation.

  10. Q: What is the package type of XC6118C20AMR-G? A: XC6118C20AMR-G is available in a small SOT-23-5 package, which is commonly used in compact electronic designs.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of XC6118C20AMR-G.