Torex Semiconductor Ltd
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
XC6118N28DGR-G
عرض التفاصيل جداول البيانات

XC6118N28DGR-G

Product Overview

Category

XC6118N28DGR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

  • Package: DFN (Dual Flat No-leads)
  • Essence: Low dropout voltage regulator
  • Packaging/Quantity: Tape and reel, 3000 pieces per reel

Specifications

The specifications for XC6118N28DGR-G are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 2.8V
  • Dropout Voltage: 200mV (typical)
  • Output Current: 150mA (maximum)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118N28DGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (active high)

Functional Features

The functional features of XC6118N28DGR-G include:

  • Low dropout voltage: The regulator can maintain a stable output voltage even when the input voltage is close to the desired output voltage.
  • Low quiescent current: The device consumes minimal current when it is in standby mode, resulting in power savings.
  • Thermal shutdown protection: The regulator automatically shuts down if the temperature exceeds the specified limit, preventing damage to the device.
  • Short-circuit protection: In case of a short circuit, the regulator limits the output current to protect the circuitry.

Advantages and Disadvantages

Advantages: - Low dropout voltage ensures efficient regulation. - Low quiescent current minimizes power consumption. - Thermal shutdown and short-circuit protection enhance reliability.

Disadvantages: - Limited output current of 150mA may not be suitable for high-power applications. - Operating temperature range of -40°C to +85°C may restrict usage in extreme environments.

Working Principles

XC6118N28DGR-G is a low dropout voltage regulator that uses a pass transistor to regulate the output voltage. When the input voltage exceeds the desired output voltage, the pass transistor conducts and maintains a stable output voltage. The regulator continuously monitors the output voltage and adjusts the pass transistor accordingly to ensure regulation.

Detailed Application Field Plans

XC6118N28DGR-G can be used in various applications, including but not limited to:

  1. Battery-powered devices: It can regulate the voltage in portable electronic devices such as smartphones, tablets, and wearable devices.
  2. IoT devices: It is suitable for powering sensors, microcontrollers, and communication modules in Internet of Things (IoT) applications.
  3. Automotive electronics: The regulator can be used in automotive systems to stabilize the voltage for various components like infotainment systems, lighting, and control units.

Detailed and Complete Alternative Models

Some alternative models to XC6118N28DGR-G are:

  1. XC6206P282MR-G: Similar low dropout voltage regulator with an output voltage of 2.8V and a maximum output current of 200mA.
  2. LM1117MPX-2.8/NOPB: Low dropout voltage regulator with an output voltage of 2.8V and a maximum output current of 800mA.
  3. MCP1700T-2802E/TT: Low dropout voltage regulator with an output voltage of 2.8V and a maximum output current of 250mA.

These alternative models provide similar functionality and can be considered based on specific application requirements.

Word count: 457 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6118N28DGR-G في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of XC6118N28DGR-G in technical solutions:

  1. Q: What is XC6118N28DGR-G? A: XC6118N28DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6118N28DGR-G? A: The operating voltage range of XC6118N28DGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6118N28DGR-G help in technical solutions? A: XC6118N28DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.

  4. Q: Can XC6118N28DGR-G be used in battery-powered applications? A: Yes, XC6118N28DGR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

  5. Q: What is the output type of XC6118N28DGR-G? A: XC6118N28DGR-G has an open-drain output type, which means it can be easily connected to other devices with different voltage levels.

  6. Q: What is the typical reset threshold voltage of XC6118N28DGR-G? A: The typical reset threshold voltage of XC6118N28DGR-G is 2.8V, but it can be adjusted using external resistors.

  7. Q: Does XC6118N28DGR-G have a built-in delay circuit? A: Yes, XC6118N28DGR-G has a built-in delay circuit that ensures a stable reset signal is provided for a specified duration after the power supply voltage rises above the threshold.

  8. Q: Can XC6118N28DGR-G be used in automotive applications? A: Yes, XC6118N28DGR-G is suitable for automotive applications as it meets the necessary quality and reliability standards required for such environments.

  9. Q: What is the package type of XC6118N28DGR-G? A: XC6118N28DGR-G is available in a small SOT-25 package, which is compact and easy to integrate into various designs.

  10. Q: Is XC6118N28DGR-G RoHS compliant? A: Yes, XC6118N28DGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations regarding the use of hazardous materials.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118N28DGR-G.