XC6119C32ANR-G belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for voltage detection and reset functions.
XC6119C32ANR-G is packaged in a small outline transistor (SOT) package, specifically SOT-23-5.
The essence of XC6119C32ANR-G lies in its ability to accurately detect voltage levels and provide a reset signal when necessary, ensuring proper functioning of electronic devices.
This product is typically available in reels containing 3,000 units per reel.
XC6119C32ANR-G has a total of five pins arranged as follows:
```
| | --| |-- |____| ```
Pin configuration: 1. VDD: Supply voltage input 2. GND: Ground reference 3. RESET: Active low reset output 4. VOUT: Voltage detection output 5. N/C: No connection (unused pin)
XC6119C32ANR-G operates by continuously monitoring the input voltage. When the voltage falls below the threshold level, the IC triggers a reset signal, which can be used to restart or reinitialize the connected electronic device. The active low output ensures compatibility with various microcontrollers and digital logic circuits.
XC6119C32ANR-G finds applications in various electronic devices that require voltage monitoring and reset functionality. Some potential application fields include:
Note: Please refer to the respective datasheets for detailed specifications and pin configurations of alternative models.
Word count: 536 words
Sure! Here are 10 common questions and answers related to the application of XC6119C32ANR-G in technical solutions:
Question: What is XC6119C32ANR-G?
- Answer: XC6119C32ANR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used in various technical solutions.
Question: What is the purpose of XC6119C32ANR-G?
- Answer: The purpose of XC6119C32ANR-G is to monitor the voltage level in electronic circuits and provide an output signal when the voltage exceeds or falls below a certain threshold.
Question: What is the operating voltage range of XC6119C32ANR-G?
- Answer: The operating voltage range of XC6119C32ANR-G is typically between 0.8V and 6.0V.
Question: How does XC6119C32ANR-G detect voltage levels?
- Answer: XC6119C32ANR-G uses an internal voltage reference and comparator to compare the input voltage with a preset threshold. When the voltage crosses this threshold, it triggers the output signal.
Question: Can XC6119C32ANR-G be used in battery-powered applications?
- Answer: Yes, XC6119C32ANR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.
Question: What is the output type of XC6119C32ANR-G?
- Answer: XC6119C32ANR-G provides an open-drain output, which means it can be connected to other devices or microcontrollers for further processing.
Question: What is the typical accuracy of XC6119C32ANR-G?
- Answer: The typical accuracy of XC6119C32ANR-G is ±1.5% of the detection voltage.
Question: Can XC6119C32ANR-G be used for overvoltage protection?
- Answer: Yes, XC6119C32ANR-G can be used for overvoltage protection by setting the threshold voltage to the desired level and triggering an action when the voltage exceeds it.
Question: Is XC6119C32ANR-G suitable for automotive applications?
- Answer: Yes, XC6119C32ANR-G is suitable for automotive applications as it meets the necessary standards and has a wide operating temperature range.
Question: Are there any specific precautions to consider when using XC6119C32ANR-G?
- Answer: It is recommended to follow the manufacturer's datasheet and guidelines for proper usage of XC6119C32ANR-G. Pay attention to input voltage limits, thermal considerations, and other application-specific requirements.