XC6121E716ER-G belongs to the category of voltage regulators.
It is commonly used for voltage regulation in electronic circuits.
XC6121E716ER-G is typically packaged in reels and comes in a quantity of 3000 units per reel.
The XC6121E716ER-G has the following pin configuration:
| Pin Name | Description | |----------|-------------| | VIN | Input voltage pin | | GND | Ground pin | | VOUT | Output voltage pin | | CE | Chip enable pin | | NC | No connection |
The XC6121E716ER-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.
XC6121E716ER-G can be used in various applications, including: - Battery-powered devices - Portable electronic devices - IoT devices - Consumer electronics - Industrial equipment
Some alternative models to XC6121E716ER-G are: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6220C332MR-G - XC6220D332MR-G - XC6220E332MR-G - XC6220F332MR-G - XC6220G332MR-G - XC6220H332MR-G - XC6220J332MR-G
These models offer similar functionality and characteristics, providing options for different design requirements.
Word count: 346 words
Sure! Here are 10 common questions and answers related to the application of XC6121E716ER-G in technical solutions:
Question: What is XC6121E716ER-G?
- Answer: XC6121E716ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Question: What is the operating voltage range of XC6121E716ER-G?
- Answer: The operating voltage range of XC6121E716ER-G is typically between 0.8V and 6.0V.
Question: What is the output type of XC6121E716ER-G?
- Answer: XC6121E716ER-G has an open-drain output type, which means it can be connected to other devices or circuits for further processing.
Question: What is the quiescent current consumption of XC6121E716ER-G?
- Answer: The quiescent current consumption of XC6121E716ER-G is typically around 1.0µA, making it suitable for low-power applications.
Question: Can XC6121E716ER-G detect both overvoltage and undervoltage conditions?
- Answer: No, XC6121E716ER-G is specifically designed to detect undervoltage conditions only.
Question: What is the threshold voltage of XC6121E716ER-G?
- Answer: The threshold voltage of XC6121E716ER-G is fixed at a specific value, such as 3.08V or 3.3V, depending on the specific variant.
Question: How does XC6121E716ER-G indicate an undervoltage condition?
- Answer: When an undervoltage condition is detected, the output of XC6121E716ER-G goes low (active) and can be used to trigger further actions or alarms in the system.
Question: Can XC6121E716ER-G be used in automotive applications?
- Answer: Yes, XC6121E716ER-G is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability and performance.
Question: What is the temperature range of XC6121E716ER-G?
- Answer: The operating temperature range of XC6121E716ER-G is typically between -40°C and +85°C.
Question: Is XC6121E716ER-G available in different package options?
- Answer: Yes, XC6121E716ER-G is available in various package options, such as SOT-25, SOT-89, and USP-6C, providing flexibility for different design requirements.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application guidelines provided by Torex Semiconductor for XC6121E716ER-G.