Torex Semiconductor Ltd
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
XC6122A628ER-G
عرض التفاصيل جداول البيانات

XC6122A628ER-G

Product Overview

Category

XC6122A628ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection

Package

XC6122A628ER-G is available in a small SOT-23-5 package.

Essence

The essence of XC6122A628ER-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

It is typically packaged in reels, with each reel containing a specific quantity of XC6122A628ER-G units.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122A628ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. NC: No connection pin
  5. VOUT: Output voltage pin

Functional Features

  • High precision voltage regulation ensures stable output voltage.
  • Low dropout voltage allows efficient operation even with low input voltages.
  • Low quiescent current minimizes power consumption.
  • Thermal shutdown protection prevents damage due to excessive temperature.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection

Disadvantages

  • Limited input voltage range (2.5V - 6.0V)
  • Limited output voltage range (1.2V - 5.5V)

Working Principles

XC6122A628ER-G operates by comparing the output voltage with a reference voltage and adjusting the internal circuitry to maintain a stable output voltage. It utilizes feedback control to regulate the voltage and ensure consistent performance.

Detailed Application Field Plans

XC6122A628ER-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122A628ER-G are: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6204B332MR-G - XC6203B332MR-G

These models offer similar functionality and characteristics, providing options for different design requirements.

Note: The content provided above is approximately 300 words. Additional information may be required to meet the 1100-word requirement.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6122A628ER-G في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of XC6122A628ER-G in technical solutions:

  1. Question: What is XC6122A628ER-G?
    - Answer: XC6122A628ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122A628ER-G?
    - Answer: The operating voltage range of XC6122A628ER-G is typically from 0.8V to 6.0V.

  3. Question: What is the output type of XC6122A628ER-G?
    - Answer: XC6122A628ER-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve different logic levels.

  4. Question: What is the quiescent current consumption of XC6122A628ER-G?
    - Answer: The quiescent current consumption of XC6122A628ER-G is typically around 1.0µA, making it suitable for low-power applications.

  5. Question: What is the accuracy of the voltage detection threshold in XC6122A628ER-G?
    - Answer: The accuracy of the voltage detection threshold in XC6122A628ER-G is typically ±2%.

  6. Question: Can XC6122A628ER-G be used for overvoltage protection?
    - Answer: No, XC6122A628ER-G is not designed for overvoltage protection. It is primarily used for monitoring and detecting undervoltage conditions.

  7. Question: What is the temperature range in which XC6122A628ER-G operates?
    - Answer: XC6122A628ER-G has an operating temperature range of -40°C to +85°C, making it suitable for a wide range of environments.

  8. Question: Can XC6122A628ER-G be used in automotive applications?
    - Answer: Yes, XC6122A628ER-G is AEC-Q100 qualified and can be used in automotive applications where undervoltage monitoring is required.

  9. Question: What is the package type of XC6122A628ER-G?
    - Answer: XC6122A628ER-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

  10. Question: Is XC6122A628ER-G RoHS compliant?
    - Answer: Yes, XC6122A628ER-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.