Torex Semiconductor Ltd
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
XC6122C733MR-G
عرض التفاصيل جداول البيانات

XC6122C733MR-G

Product Overview

Category

XC6122C733MR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact size
  • Low power consumption

Package

XC6122C733MR-G comes in a small surface-mount package.

Essence

The essence of XC6122C733MR-G is to provide a stable and regulated voltage output for electronic devices.

Packaging/Quantity

XC6122C733MR-G is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122C733MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages

  • Small form factor
  • Wide input voltage range
  • Stable and regulated output voltage
  • Low power consumption
  • Built-in protection features

Disadvantages

  • Limited output current capacity (200mA)
  • Not suitable for high-power applications

Working Principles

XC6122C733MR-G operates by regulating the input voltage to maintain a stable output voltage of 3.3V. It utilizes internal circuitry to monitor and adjust the voltage levels, ensuring a consistent and reliable power supply for connected electronic devices.

Detailed Application Field Plans

XC6122C733MR-G is widely used in various electronic applications, including but not limited to:

  1. Battery-powered devices
  2. Portable electronics
  3. IoT (Internet of Things) devices
  4. Wearable technology
  5. Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122C733MR-G are:

  1. XC6206P332MR-G
  2. LM1117-3.3
  3. MCP1700-3302E/TO

These models offer similar voltage regulation capabilities and can be suitable replacements depending on specific requirements.

In conclusion, XC6122C733MR-G is a voltage regulator with excellent characteristics such as voltage stabilization, compact size, and low power consumption. It finds applications in various electronic devices and offers advantages like wide input voltage range and built-in protection features. However, it has limitations in terms of output current capacity and may not be suitable for high-power applications.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6122C733MR-G في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of XC6122C733MR-G in technical solutions:

  1. Q: What is XC6122C733MR-G? A: XC6122C733MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6122C733MR-G? A: The operating voltage range of XC6122C733MR-G is from 0.7V to 6.0V.

  3. Q: What is the output type of XC6122C733MR-G? A: XC6122C733MR-G has an open-drain output type, which means it can sink current but cannot source current.

  4. Q: What is the typical quiescent current consumption of XC6122C733MR-G? A: The typical quiescent current consumption of XC6122C733MR-G is around 1.0µA.

  5. Q: How accurate is XC6122C733MR-G in detecting voltage levels? A: XC6122C733MR-G has a detection voltage accuracy of ±1.5%.

  6. Q: Can XC6122C733MR-G be used for overvoltage protection? A: No, XC6122C733MR-G is not designed for overvoltage protection. It is primarily used for undervoltage detection.

  7. Q: What is the typical response time of XC6122C733MR-G? A: The typical response time of XC6122C733MR-G is 200ms.

  8. Q: Does XC6122C733MR-G have a built-in hysteresis function? A: Yes, XC6122C733MR-G has a built-in hysteresis function to prevent oscillation caused by voltage fluctuations near the detection threshold.

  9. Q: Can XC6122C733MR-G be used in automotive applications? A: Yes, XC6122C733MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  10. Q: What is the package type of XC6122C733MR-G? A: XC6122C733MR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications or application requirements.