Torex Semiconductor Ltd
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
XC6122D318MR-G
عرض التفاصيل جداول البيانات

XC6122D318MR-G

Product Overview

Category

XC6122D318MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • Low power consumption
  • High accuracy
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6122D318MR-G comes in a small surface-mount package.

Essence

The essence of XC6122D318MR-G is its ability to provide stable and regulated voltage output.

Packaging/Quantity

It is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.18V
  • Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122D318MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Low dropout voltage
  • Excellent line and load regulation
  • Built-in overcurrent protection
  • Thermal shutdown protection
  • Reverse current blocking

Advantages

  • Small form factor allows for space-saving designs
  • Low power consumption extends battery life
  • Wide input voltage range provides flexibility in various applications
  • Overcurrent and thermal protection enhance reliability
  • Reverse current blocking prevents damage to the circuit

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Higher cost compared to traditional linear voltage regulators
  • Sensitive to input voltage fluctuations

Working Principles

XC6122D318MR-G is a linear voltage regulator that uses a feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry to regulate the output voltage within the specified range.

Detailed Application Field Plans

XC6122D318MR-G finds applications in various electronic devices, including:

  1. Portable consumer electronics
  2. Battery-powered devices
  3. IoT devices
  4. Wearable devices
  5. Automotive electronics
  6. Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to XC6122D318MR-G include:

  1. XC6206P332MR-G: 3.3V output voltage, 200mA output current
  2. XC6219B182MR-G: 1.8V output voltage, 300mA output current
  3. XC6220C122MR-G: 1.2V output voltage, 500mA output current
  4. XC6230D252MR-G: 2.5V output voltage, 150mA output current
  5. XC6240F302MR-G: 3.0V output voltage, 100mA output current

These alternative models offer different output voltages and current capabilities to suit specific application requirements.

Word count: 408 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6122D318MR-G في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of XC6122D318MR-G in technical solutions:

  1. Question: What is XC6122D318MR-G?
    - Answer: XC6122D318MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122D318MR-G?
    - Answer: The operating voltage range of XC6122D318MR-G is from 0.8V to 6.0V.

  3. Question: How does XC6122D318MR-G work?
    - Answer: XC6122D318MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or rises above the reference voltage, it triggers an output signal.

  4. Question: What is the output type of XC6122D318MR-G?
    - Answer: XC6122D318MR-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor.

  5. Question: What is the typical quiescent current consumption of XC6122D318MR-G?
    - Answer: The typical quiescent current consumption of XC6122D318MR-G is very low, usually around 1.0µA.

  6. Question: Can XC6122D318MR-G be used for undervoltage and overvoltage detection?
    - Answer: Yes, XC6122D318MR-G can be used for both undervoltage and overvoltage detection, depending on how it is configured.

  7. Question: What is the accuracy of XC6122D318MR-G?
    - Answer: The accuracy of XC6122D318MR-G is typically ±1.5% at room temperature.

  8. Question: Can XC6122D318MR-G be used in automotive applications?
    - Answer: Yes, XC6122D318MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  9. Question: Does XC6122D318MR-G have built-in hysteresis?
    - Answer: Yes, XC6122D318MR-G has a built-in hysteresis feature, which helps to prevent output oscillation near the threshold voltage.

  10. Question: What is the package type of XC6122D318MR-G?
    - Answer: XC6122D318MR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that the answers provided here are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.